Choose Language / Country
Find KNX Training Centres
Find the Certified KNX Training Centre that is closer to you. By clicking the field "Country" you can sort the Training Centres by country.
-
Ferrocarrils catalans 43
08038 Barcelona
Spain
Phone: +34.932203982
Mobile: -
Fax: -
Website: www.domoticaygestion.com
Email: - Link to mapWe offer Certified National KNX Courses in the face-to-face and blended modality with a great practical orientation, based on the knowledge accumulated after more than 15 years of experience in KNX projects, dealing with the engineering, programming and start-up of each installationApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Centro Comercial Las Américas, modulo A8, Av. El Vedat 180
46900 Torrente
Spain
Phone: +34.658962501
Mobile: -
Fax: -
Website: www.knxcenter.es
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course kaserntorget 6
411 18 Göteborg
Sweden
Phone: +46.317575020
Mobile: -
Fax: -
Website: http://www.2ctrl.se
Email: - Link to mapWe are a KNX based agency in Sweden promoting various KNX products on a daily basis. We work with installers, integrators and property owners helping them to find smarter, more efficient, open solutions and train them in maintenance and programming. KNX Basic Course and KNX Advanced CourseApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Dragana Rakica 20E
11080 Zemun
Serbia
Phone: +381.628890297
Mobile: -
Fax: -
Website: http://www.siping.rs
Email: - Link to map“ŠIPING ltd” Company was founded in 2008 since it has an active role in domestic and foreign market in all areas of services delivery design and construction of works. The primary business is the design and execution of all electrical and mechanical installations, which are used in different types of buildings (residential business, sports, health and facilities for special purposes, such as gas stations, telecommunications facilities, radio-base stations of mobile operators, etc.). The specific requirements of the market, which are reflected in the variable and periodic need for a certain type of activities, have contributed that “Šiping ltd” Company in addition to core business, develop in several directions. Pursuant to the requirements has been established the department that deals with the building automation systems based on KNX standard.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Paragwgikotitas 28Β
2326 Lakatamia Industrial Area, Nicosia
Cyprus
Phone: +357.22875225
Mobile: -
Fax: +357.22875226
Website: www.electricalcy.com
Email: - Link to mapThe Training Center Σ.Ε.Η.Κ. has the objective of coordinating, managing and implementing of vocational education, training and education programs. The aim of the Σ.Ε.Η.Κ. is to offer education and training services at the highest level with measurable results.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course -
Blackburn Road 601
3168 Notting Hill
Australia
Phone: +61.385777139
Mobile: -
Fax: -
Website: www.abbaustralia.com.au
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Avenida do Anastácio 740
05119900 Sao Paulo
Brazil
Phone: +55.1136888133
Mobile: -
Fax: +55.1136889977
Website: www.abb.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Dr Mohamed Kamel Hussein St. 7
5040 Heliopolice West 11771 Cairo
Egypt
Phone: +202.26251732
Mobile: -
Fax: +202.26222667
Website: www.abb.com/knx
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Al Ahsa Street, Al Malaz P. O. Box 325841
11371 Riyadh
Saudi Arabia
Phone: +966.114845627
Mobile: -
Fax: +966.12651211
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course ThinkPark Tower 22F 2-1-1 Osaki Shinagawa-Ku
141-6022 Tokyo
Japan
Phone: +81.357846257
Mobile: -
Fax: +81.357846260
Website: http://www.abb.co.jp
Email: - Link to mapWe are holding KNX training course in Japan since 2014.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Frankeneng 15
6716AA Ede
Netherlands
Phone: +31.318669300
Mobile: -
Fax: +31.318631718
Website: www.abbconnect.nl
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Kangxin Highway 4528
201319 Shanghai
China
Phone: +86.02123288742
Mobile: -
Fax: -
Website: -
Email: - Link to mapABB KNX training Centre is based in Shanghai, which will be opened to all the engineers and designers who are interested in KNX. We provide basic training of KNX. http://www.abb.com.cn/cawp/cnabb057/ec5ecde08b9eff3348257ce5000afb31.aspxApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Peenya Industrial Area Phase 2 Plot No 5 & 6,
560058 Bangalore
India
Phone: +91.8022948543
Mobile: -
Fax: +91.9845629601
Website: www.abb.com/in
Email: - Link to mapWe conduct KNX certified courses as well as KNX product & application trainings.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Paseo de las Américas 31
53125 Naucalpan
Mexico
Phone: +52 55 36019500
Mobile: -
Fax: -
Website: www.abb.com.mx
Email: - Link to mapWith a heritage spanning more than 130 years, ABB operates in more than 100 countries and employs around 136,000 people. ABB benefits from over 26 years of experience in intelligent building control systems. ABB develops, produces and sells a complete range of innovative products for building installation. ABB plays a leading role in the KNX Association. ABB\'s products are conform to the international KNX standard, the leading technology worldwide for intelligent building control. ABB Mexico employs around 2,400 people and it is a pioneering technology leader in electrification products, robotics and motion, industrial automation and power grids, serving customers in utilities, industry, transport and infrastructure. ABB today writes the future of digitalization and is a leader of the Energy Revolution and the Fourth Industrial Revolution.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Bergerveien 12
1396 Billingstad
Norway
Phone: +47.2287200
Mobile: -
Fax: -
Website: www.abb.com/KNX
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Ayer Rajah Crescent 2
139935 Singapore
Singapore
Phone: +65.96388142
Mobile: -
Fax: +65.67765711
Website: abb.com
Email: - Link to mapTraining Centre for RCC (Regional Competency Centre) located in Singapore to serve Asia ABB market. To help to promote KNX solution and give Basic and Advance KNX Training to all ABB Staff, System Integrator and Customer.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Resslova 3
46602 Jablonec Nad Nisou
Czech Republic
Phone: +420.731552383
Mobile: -
Fax: -
Website: www117.abb.com
Email: - Link to mapTraining and presentation company ABB and system KNXApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Via Ardeatina 2491
00040 Roma
Italy
Phone: +39.290347789
Mobile: -
Fax: -
Website: -
Email: - Link to mapIn 2010 ABB launched in Italy its KNX certified training center in Vittuone, contributing to spread KNX Building Automation knowledge and expertise all over Italy, among different customers. More than 70 people attended KNX basic course becoming KNX partner. Now it has become available a second KNX certified training center in ABB factory in S.Palomba, near Rome, in order to facilitate spread of KNX also in center-southern part of Italy, allowing people to access more easily KNX training sessions and to become KNX partner. The training room is fully equipped with different KNX devices in order to cover all building automations applications such as lighting, shutters, HVAC systems; from the basic ones to the advanced ones such as constant lighting control, DALI lighting, energy&load management, security&safety, visualization and centralized control.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Viale dell'Industria 18
20010 Vittuone (Milan)
Italy
Phone: +39.0290347789
Mobile: -
Fax: -
Website: www.bol.it.abb.com
Email: - Link to mapIn 2010 ABB launched in Italy its KNX certified training center in Vittuone, contributing to spread KNX Building Automation knowledge and expertise all over Italy, among different customers. The training room is fully equipped with different KNX devices in order to cover all building automations applications such as lighting, shutters, HVAC systems; from the basic ones to the advanced ones such as constant lighting control, DALI lighting, energy&load management, security&safety, visualization and centralized control.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Brown Boveri Platz 3
5400 Baden
Switzerland
Phone: +41.585860000
Mobile: -
Fax: +41.585860601
Website: www.normelec.ch
Email: - Link to mapABB is a pioneering technology leader that is writing the future of industrial digitalization. For more than four decades, we have been at the forefront, innovating digitally connected and enabled industrial equipment and systems. Every day, we drive efficiency, safety and productivity in utilities, industry, transport and infrastructure globally. With a heritage spanning more than 130 years, ABB operates in more than 100 countries and employs around 132,000 people, thereof 6’000 in Switzerland. We offer in our in-house certified training center a comprehensive further education program.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Eppelheimer Straße 82
69123 Heidelberg
Germany
Phone: +49.62217011234
Mobile: -
Fax: +49.6221701630
Website: www.abb.com/knx
Email: - Link to mapABB is represented in over 100 countries with more than 140,000 employees. ABB benefits from over 25 years of experience in intelligent building control systems. ABB develops, produces and sells a complete range of innovative products for building installation. ABB plays a leading role in the KNX Association. ABB\\'s products are conform to the international KNX standard, the leading technology worldwide for intelligent building control. ABB STOTZ-KONTAKT, located in Heidelberg, develops, manufactures and sells products for the electrical installation and automation of buildings, machines and plants.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Arnöleden 2
60129 Nyköping
Sweden
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course rue du Chat Botté 324
01708 Miribel
France
Phone: +33.437404295
Mobile: -
Fax: +33.437404466
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Organize Sanayi Bölgesi 2 cadde No:16
34776 Y.dudullu,Istanbul
Turkey
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Emil Neckelmanns Vej 14
5220 Odense SO
Denmark
Phone: -
Mobile: -
Fax: -
Website: www.abb.com/dk
Email: - Link to mapKNX training is performed at ABB Odense, Fyn, DenmarkApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course 3rd Street, Al Quoz, 4th Interchange, Sheikh Zayed Ro
11070 Dubai
United Arab Emirates
Phone: +971.43147584
Mobile: -
Fax: +971.43401539
Website: www.abb.com/knx
Email: - Link to mapABB KNX Certified Training Center in the United Arab EmiratesApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Molino de las Fuentas s/n
46026 Valencia
Spain
Phone: +34.963357362
Mobile: -
Fax: +34.963357315
Website: cfv.adif.es/campusffe
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Av. Monsenhor Ângelo Sampaio 377
56330-300 Petrolina
Brazil
Phone: +55.8732026008
Mobile: -
Fax: -
Website: www.treinamentoknxbrasil.com.br
Email: - Link to mapAdvantis Soluções em Eletricidade is a fully engaged company to the development of the KNX system in Brazil. Working as a training center, we have the great expectation of graduate a big quantity of students in the KNX field, or even work as a support in consulting KNX big projects.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Knappenweg 34
6600 Pflach
Austria
Phone: +43.6642554847
Mobile: -
Fax: -
Website: www.aec-tech.at
Email: - Link to mapKNX Training and Certification for Basic and Advanced KNX courses Guidance and mentoring with KNX projects and selected products KNX education in collaboration with technical engineering schools Certfication center for Basic and Advanced KNX coursesApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course du molinel 6
59169 cantin
France
Phone: +33.608419622
Mobile: -
Fax: -
Website: http://www.afpa.fr
Email: - Link to mapThe center of AFPA (Agency for the vocational training of adults) to DOUAI CANTIN provides training to approximately 2 500 students per year in the sectors of industry, building, construction and service. It offers a range of type NVQ 1 level, 2, 3 course of training leading to a certified national diploma of Government. Building automation and electricity technician which is operational since 2006 training course includes training the technician electricity General program. The course is based on the KNX Protocol. Students using a range of specifications developed offers, setting the parameters for buildings intelligent automation wiring and installation. Students carry out practical work on specifically recreated in training situations. They use the ETS software program: switching and lighting variation, shutters and blinds, control, thermal management and various other sy...Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course chemin de la clue -
13011 MARSEILLE
France
Phone: +33.608609780
Mobile: -
Fax: -
Website: Afpa.fr
Email: - Link to mapThe AFPA centre Marseille la Treille The KNX standard: Passport to employability The AFPA (Association for adult vocational training) centre in Marseilles La Treille provides training for around 2,400 trainees per year in industry, construction and service industry sectors. The building automation and electricity technician training course which has been operational since 2006 includes general electricity technician training as part of the programme. The course is based on the KNX protocol. Trainees using a range of specifications draw up offers defining the parameters for intelligent building automation cabling and installation. Within the scope of the issue of the energy efficiency in intelligent buildings, the B.A.E.T (building automation and electricity technician) course covers trainee projects where the objective is to design user-friendly energy-saving installations.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Bin Mahmoud22652 Doha
Qatar
Phone: +974.66315375
Mobile: -
Fax: -
Website: www.almazrouicas.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Office 301, Reef Tower, Plot no. O1, Jumeirah Lakes Towers77391 Dubai
United Arab Emirates
Phone: +971.44240100
Mobile: -
Fax: +971.44230741
Website: www.almazrouicas.com
Email: - Link to mapThese courses provide the knowledge and skills that enable participants to become advance level accredited KNX building automation technicians. KNX is a worldwide standard for home and building control automation and these courses will allow participants to develop skills to work on KNX basic and advanced equipments (Lighting control, Blind control, Heating control, Security technology, Visualization systems, ...) to a level of a basic and an advance understanding. The full KNX accreditation requires successful completion of the advanced training course in addition to the basic training course. These courses are ideal for electrical contractors, electricians, building automation engineers and system integrators.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Beckstrasse 3
69412 Eberbach
Germany
Phone: +49.6271919470
Mobile: -
Fax: +49.6271919479
Website: http://www.busbaer.de
Email: - Link to mapThe Alexander Maier GmbH training centre helps integrators establish a strong base level of knowledge, on which they can continue to develop with confidence.As you attend our various training courses, you and your business will gain the knowledge and expertise to exceed customer expectations and deliver successful projects. We have been a Certified Training Centre KNX since 2001, which means that we are entitled to conduct the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 integrators, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized training (groups of at least 8 people) at .Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Buchenweg 11
8442 Hettlingen
Switzerland
Phone: +41.522651000
Mobile: -
Fax: +41.522651009
Website: http://www.all-com.ch
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Entenza 95 5a
8015 Barcelona
Spain
Phone: +34.932153195
Mobile: -
Fax: +34.932154264
Website: www.amaisys.com
Email: - Link to mapAmaisys Training Center is a space for the exchange of knowledge and the innovation, oriented to support all the professionals of the industrial and building sectors. Our training portfolio includes KNX Partner, Advance and Tutor programs and services for continuous learning: on-site and online. As main feature, we are the only center worl-wide that offers KNX Online Training with remote access to real KNX devices during the learning sessions. For more information, please, visit www.amaisys-training.com or contact us at .Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Sos. Dudesti-Pantelimon 19, sect. 3
33091 Bucharest
Romania
Phone: +40.215390153
Mobile: -
Fax: +40.318176173
Website: www.amavys.ro
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Ellermanstraat 33
2060 Antwerpen
Belgium
Phone: +32.475370016
Mobile: -
Fax: -
Website: https://www.ap.be/
Email: - Link to mapThe KNX Training Centre is part of the AP University College Antwerp, Department of Science and Technology. KNX is available for professional Bachelor students such as Energy Managers & HVAC-technicians (Electromechanics). The Training Centre is fully integrated in the building across several laboratories including a specific KNX-lab. The mobile KNX training boxes can be applied to industrial systems incorporated in the labs, a significant added value to link theory and field work. In addition to KNX Training Center, AP College is also KNX-Scientific partner. AP University College cooperates very closely with industry through integration of the latest technologies in its educational programmes and by implementing long-term projects for the industry. The KNX Training Centre for Basic and Advanced Training programmes offers industrial workers the opportunity to obtain a KNX certificate iApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Magallanes 36/38
28015 Madrid
Spain
Phone: +34.915945271
Mobile: -
Fax: +34.915943683
Website: www.apiem.org
Email: - Link to mapApiem Training Center is part of the Association of Madrid Electrical Contrators founded more than 90 yeear ago (1922). It provides a complete set of training courses both in electricity (low and medium voltage), air conditioning, new technologies, renewable energies, etc. and services to the associated persons and the electrical and building community. Since aproved as KNX training center in 2010 Apiem has organized more than 30 courses and around 450 people trained.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Mazuraniceva 4
21312 Podstrana
Croatia
Phone: +385 21/507600
Mobile: -
Fax: +385 21/507606
Website: www.apricum.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Madame Curie 00000
00000 Beirut
Lebanon
Phone: +961.1342442
Mobile: -
Fax: -
Website: -
Email: - Link to mapArchimedia Lebanon Training Center is a space for the exchange of knowledge and the innovation, oriented to support all the professionals of the industrial and building sectors. Our Training Center is offering on-site and online Basic KNX Training. As main feature, we are the only center worldwide that offers KNX Online Training with remote access to real KNX devices during the learning sessions. For more information, please contact us at team.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Unit 406- Dusseldorf Business Points- Al barsha 1
PO Box: 283447 Dubai
United Arab Emirates
Phone: +971.44328526
Mobile: -
Fax: +971.44328525
Website: www.armiti.ae
Email: - Link to mapArmiti is one of the best system integrator and training center in the Middle eastApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Letnikovskaya 6
115114 Moscow
Russian Federation
Phone: +7.4957884071
Mobile: -
Fax: +7.4957873340
Website: armo-training.ru
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Raad Alley, Yaser Threeway, Niavaran No. 9
1647718566 Tehran
Iran, Islamic Republic of
Phone: +98.2126148258
Mobile: -
Fax: +98.2189778348
Website: www.smart-buildings.ir
Email: - Link to mapArtman KNX Training Center is the first official KNX Center in Iran. We are offering top quality KNX courses (Basic and Advanced, and Tutor course) to all those like to participate in KNX community. Also Artman is started its efforts to participate in KNX User Club Iran, and organized the 25th anniversary of KNX in Iran. We will continue to introduce KNX solutions to different organizations and individuals in Iran and neighbor countries. All those interested (in Iran and Middle East) can contact us to participate in the courses or other programs related to KNX worldwide standard.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Carrer d'es Teixidors, 32b, Carrer d'es Teixidors, 32b,
07141 Marratxí
Spain
Phone: +34.971770504
Mobile: -
Fax: +34.871116242
Website: http://www.asinem.net/
Email: - Link to mapTraining of KNX partner and training related to the KNX systemApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Parque Industrial Autoeuropa 00000
2951-510 Quinta Do Anjo
Portugal
Phone: +351.212107327
Mobile: -
Fax: -
Website: www.atec.pt
Email: - Link to mapATEC – Training Academy, created in December 2003, is the outcome of a project conceived by the promoters Volkswagen Autoeuropa, Siemens, Bosch and the German-Portuguese Chamber of Commerce and Industry, with the support of the Portuguese Government, aiming to provide Portugal with a Training structure that would meet the needs of the Industrial cluster in terms of staff training and qualification. ATEC’s core business is the professional qualification of youngsters in several technical areas. ATEC training methodology according to German standards binds theory and practice allowing trainees to experience the routine of a normal worker. ATEC also offers companies Taylor-made courses and intervention projects in the scope of Operational Consultancy. ATEC currently develops activities from several areas like Mecatronics, Automation, IT, Methods, Quality, Lean Tools, and others.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course West Hekmat St , Andarzgoo Blvd , Farmanieh No 90 ,Unit2
1938853461 Tehran
Iran, Islamic Republic of
Phone: +98.2122208207
Mobile: -
Fax: +98.2122694679
Website: www.Atrinaco.com
Email: - Link to mapAtrina KNX Training center is a space for the exchange of knowledge and the innovation. With more than 10 years’ experience in building\'s projects and training in building\'s products, we offer a top quality & unique training experience to each applicant in Middle East to all those who like to participate in KNX community (both in Basic, Advanced, and Tutor course in near future). Our training portfolio includes world-wide certificated programs and services for continuous learning. All services are designed for professionals whom want to improve their technical knowledge and, therefore, enhance their leadership and management skills. Atrina Building Automation is an independent player on the market Which has known as first official member of KNX Association in Iran, and also the biggest cooperator of KNX Partner in Middle East. The main Target is to increase the use and knowledge.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course SRTVN Qd 701 cj P sala 3137
70719900 Brasilia
Brazil
Phone: +55.6132027962
Mobile: -
Fax: +55.6132027962
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course 7th Narenjestan St., Farmanieh Cross Unit 24 28
1957944451 Tehran
Iran, Islamic Republic of
Phone: +98.2126152536
Mobile: -
Fax: -
Website: www.knx.ir
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course -
Rua da Piedade 39
9500-362 Ponta Delgada
Portugal
Phone: +351.919893822
Mobile: -
Fax: -
Website: http://www.modusnefer.pt
Email: - Link to mapBAC training is a European (and world wide) engineering, consulting, and training firm. We provide specialized training in the industrial, building and home automation sectors. Our main offices are based in Portugal, with additional international locations. You can reach us via email at :Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course FHG/VT N960
67056 Ludwigshafen
Germany
Phone: +49.6216072286
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Brooklands Drive 50
CW4 8JD Goostrey, Cheshire
United Kingdom
Phone: +44.7577498108
Mobile: -
Fax: -
Website: www.bautek.co.uk
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Jl.Raya Pandeglang KM3 45
42125 Serang, Banten
Indonesia
Phone: +62.254200160
Mobile: -
Fax: +62.254214641
Website: http://www.kios3in1.net/002/
Email: - Link to mapBBPLK Serang is a training institution under the Ministry of Manpower of the Republic of Indonesia. Core business BBPLK Serang is training and certification for electricity sector. BBPLK serang serves training and certification in electrical installations, automation building, Industrial automation (PLC, SCADA, Pneumatic and hydraulic), power plant and power distribution. BBPLK Serang also informs job vacancy ncluding placements after completing training. BBPLK Serang also a training center for worldskills competitors from indonesia in electrical installations field.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Franz-Zang-Straße 3-7
67059 Ludwigshafen
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Wandsworth Bridge South
SW18 1TN London
United Kingdom
Phone: +44.2088740404
Mobile: -
Fax: +44.2088770153
Website: www.bemco-knx.co.uk
Email: - Link to mapThe Biritish Electrical Manufacturing Company (BEMCo) is a 3rd generation family business, originally founded in 1893. Today the business has 9 branches around the UK, offering the full range of standard electrical and automation products with a Certified KNX Training centre based at our Wandsworth branch in London.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course O. J. Brochs gate 16
5006 Bergen
Norway
Phone: +47.93034738
Mobile: -
Fax: -
Website: www.bvu.no
Email: - Link to mapElectrical school where we educate electricians, automation electricians, high voltage electricians, how to install electrical equipment in explosive areas, first aid, low voltage technicians etc. We also run couarses in Ex basic, Ex maintenance. We are also an electrical contractor with 5 electricians involved in installing in houses and industry. We also have couarse in intrinsic safety. All of our instructors have experience fron the north sea and many have been working as a teacher in schools in Bergen. We have also been working for the navy in Bergen.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Klagebach 38
58579 Schalksmühle
Germany
Phone: +49.2355905405
Mobile: -
Fax: +49.2355905115
Website: www.berker.com
Email: - Link to map.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Thomas-Mann-Straße 1
04720 Döbeln
Germany
Phone: +49.343157610
Mobile: -
Fax: -
Website: https://www.bsz-dl-mw.de/
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Engerthstraße 117
1200 Wien
Austria
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Lavesallee 14
30169 Hannover
Germany
Phone: +49.51126099106
Mobile: -
Fax: +49.51113320
Website: www.bbs-me.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Schorbuser Weg 2
3051 Cottbus
Germany
Phone: +49.3555901510
Mobile: -
Fax: +49.3557835310
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Weidenstraße 2
48683 Ahaus
Germany
Phone: +49.2561699115
Mobile: -
Fax: +49.2561699510
Website: www.bbs-ahaus.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Toblweg 6
39031 Bruneck
Italy
Phone: -
Mobile: -
Fax: -
Website: www.bruneck.berufsschule.it
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Altes Feld 20
59821 Arnsberg
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Wüstenhagenerstraße 18-26
42855 Remscheid
Germany
Phone: -
Mobile: -
Fax: -
Website: www.bzi-rs.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course An der Berufsschule 20
46236 Bottrop
Germany
Phone: +49.2041706270
Mobile: -
Fax: +49.20417062777
Website: www.berufskolleg-bottrop.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Herderstraße 3
45964 Gladbeck
Germany
Phone: +49.204329950
Mobile: -
Fax: +49.2043299544
Website: www.berufskolleg-gladbeck.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Fischbacherbergstrasse 2
57072 Siegen
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Glimpfingerstraße 8A
4020 Linz
Austria
Phone: +43.69981404751
Mobile: -
Fax: -
Website: www.bs-linz5.ac.at/home.html
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Miller von Aichholz Straße 30
4810 Gmunden
Austria
Phone: +43.7612646690
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Donnerschweer Straße 184
26123 Oldenburg
Germany
Phone: +49.441340920
Mobile: -
Fax: +49.44134092129
Website: www.BFE.de
Email: - Link to mapFor KNX courses of all kinds, BFE-Oldenburg is regarded as your first address. As Competence Center for Building Automation, BFE repeatadly gives new impetus to our trade. KNX participants in seminars at BFE or local courses enjoy many advantages: - Free ETS5 dongle in KNX Basic Courses! - KNX-Basic, -Advanced and -Tutor Courses (Fully KNX ++ certified) - All courses available in German and English - Exercises on current devices from multiple vendors, as you find them mixed in practice! - Intense networking among others with KNX Association, major manufacturers, KNX Professionals, SmartHome Initiative D - BFE buildings in 1992 EIB pilot plant - Lively and always fresh know-how of well-connected, knowledgeable trainers - Best food at BFE casino and great evening entertainment in wellness town Oldenburg! Be Welcome!Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Tempelhofer Straße 15-17
52068 Aachen
Germany
Phone: +49.24196740
Mobile: -
Fax: +49.2419674240
Website: www.hwk-aachen.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Vogelsbergstraße 25
36341 Lauterbach
Germany
Phone: -
Mobile: -
Fax: -
Website: www.bzl-lauterbach.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Köllestrasse 55
89077 Ulm
Germany
Phone: +49.73114257123
Mobile: -
Fax: +49.73114257110
Website: www.hwk-ulm.de
Email: - Link to mapEnglishApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Raichbergstrasse 87-89
72072 Tübingen
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Konrad-Adenauer-Ring 3-5
47167 Duisburg
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Chikkabanavara, Hurulichikkenahalli HVM Complex, #3
560090 Bangalore
India
Phone: +91.9986233659
Mobile: -
Fax: +91.8041738693
Website: www.bitscraftintegration.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course rue NETTER - Résidence Christine 5
06800 Cagnes-sur-Mer
France
Phone: +33.493085914
Mobile: -
Fax: -
Website: www.domogenius.fr/formation-domotique
Email: - Link to mapDomoGenius is a french HBAS engineering consulting firm, located in the PACA (Provence-Alpes-Côte d’Azur) area. In a constant concern to maintain a real dynamics and synergy between all the HBAS market players (architects, integrators, installers, real estate developers and builders...) of the PACA region, we opened in Nice a KNX+ training center, equipped with the most recent KNX products and mobile units. Our KNX certified tutor will provide you with the knowledges and the know-how relevant to answer all your expectations and to be confident in the successful accomplishment of your future KNX project. Follow us on www.domogenius.fr, "Nos formations" section.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Buntovnik 3
1421 Sofia
Bulgaria
Phone: +359.887600905
Mobile: -
Fax: -
Website: http://www.smartity.com
Email: - Link to mapBlueKNX Training Center is the first KNX training center in Bulgaria. Our main focus is to deliver in-depth technical knowledge to professionals of different areas, raising their interest in the worldwide stardard for home and building control. BlueKNX is offering as well project management, consultancy and technical support to system integrators and investors with regards to excellence in every detail and step of the process. We aim to be the active ambassador of KNX to the many professional organizations, guilds and chambers with respect to the promotion and implementation of the standard in Bulgaria.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Appadan 2nd St. - Olfat alley No. 3
81667-7314 Esfahan
Iran, Islamic Republic of
Phone: +98.3136623144
Mobile: -
Fax: +98.3136628324
Website: http://BNJ.IR
Email: - Link to mapBehrad-e-Naghshe Jahan (BNJ) is an Iranian consulting engineering company established in 1990, focusing on the area of Electrical and Automation systems. Over the past two decades, our company has successfully completed hundreds of residential, commercial and industrial projects which includes the first Smart Home project in the city of Isfahan in 2003. With the aim of improving the energy efficiency and promoting the sustainability, by taking advantage of the home automation systems, the company launched several educational initiatives over the past few years such as publishing the Persian translation of the official KNX handbook in two levels of basic and advanced and founding the first training center for the basic and advanced KNX courses in Isfahan. At BNJ, we are committed to use the gift and talent of our expert team to provide the best service possible to our valued customers.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course 1203/11 Sk. 3 K:6/606
35170 Konak/Izmir
Turkey
Phone: +90.2324699995
Mobile: -
Fax: +90.2324699995
Website: www.bosmer.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Chemin du Grec 440
06340 Drap
France
Phone: +33.688929034
Mobile: -
Fax: -
Website: -
Email: - Link to mapBRAO INTEGRATION is proud to announce the opening of its KNX Training Center on the French Riviera. Its first goal is to provide KNX training to electrical installers, electrical distributors, building automation engineers and system integrators. These courses provide training in design, installation and commissioning of a KNX system incorporating both theoretical and practical elements. Moreover, it will also provide more specific courses in Advance Lighting management, HVAC and different supervision systems. BRAO INTEGRATION will also provide "introduction to KNX" in order to meet architects\' and interior designers\' demands for a better understanding of design and control in home and building automatioApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course HaMasger 22
3812001 Hadera
Israel
Phone: +972.507328320
Mobile: -
Fax: +972.773328320
Website: www.bsmart-knx.com
Email: - Link to mapB.S.Systems is one of the leading companies in Israel,specializing in the KNX standard since 2007. It is involved as a center in the training of students and professionals working in the field of home and building automation. Inside the KNX Training Centre a Smart Home exhibit. B.S.Systems Certified Training Centre will give the participants an experience with real KNX devices and give them ability to design and create new KNX installations.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Limbacher Straße 195
9116 Chemnitz
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Beckstraße 19
49809 Lingen
Germany
Phone: +49.5919730418
Mobile: -
Fax: +49.95197304518
Website: www.btz-handwerk.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Kloster 1
98530 Rohr
Germany
Phone: +49.3684447380
Mobile: -
Fax: +49.3684447360
Website: www.btz-rohr.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course 11th Street 171
27012327 Mkalles
Lebanon
Phone: +961.1683770
Mobile: -
Fax: +961.1683769
Website: www.batc.com.lb
Email: - Link to mapSince 2012, BATC is a training center for various specialties in low current technologies. As the first accredited KNX+ Training Center in Lebanon, providing both the KNX Basic & the KNX Advanced Courses & Certification the knowhow of more than 4 decades of practice are shared by the only KNX tutor in Lebanon. BATC provides the advantage of hands on practices for its students with full panels of KNX devices available used during the different training levels. This unique feature in Lebanon allows students to properly troubleshoot installation samples and exercises. In addition, BATC offers Fire Safety & Intrusion Protection Courses under the Supervision of Siemens Building Technologies (Switzerland).Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Corso Nizza 38
12100 Cuneo
Italy
Phone: +39.0171070177
Mobile: -
Fax: +39.0171070311
Website: www.bigsrl.it
Email: - Link to mapKNX Training CenterApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Monaiser Straße 7
54294 Trier
Germany
Phone: +49.6518250160
Mobile: -
Fax: +49.6518250150
Website: www.bues-trier.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Georg-Schuthoff-Platz 1
40221 Düsseldorf
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Eiffestraße 450
20537 Hamburg
Germany
Phone: +49.402540200
Mobile: -
Fax: +49.4025402035
Website: https://www.bze-hamburg.de/
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course -
Weiherstrasse 10
40219 Düsseldorf
Germany
Phone: +49.2115580527
Mobile: -
Fax: +49.2115580449
Website: www.cab-ih.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Unit 2, Phoenix Park 2
PE19 8EP St Neots
United Kingdom
Phone: +44.1480213744
Mobile: -
Fax: +32.7947298282
Website: http://cedia.co.uk/
Email: - Link to mapCEDIA’s home technology training gives professionals the opportunity to get expert instruction on the skills, topics, and techniques they will use every day. From boot camps, conferences and events to all-day workshops, CEDIA\'s training is another outlet for you to learn the skills you need from world-class instructors who know the industry. Choose from a mix of hands-on and classroom-based training formats, in topics that include business, operations, technical skills, emerging trends, and more. Many offerings enable attendees to network with and learn from industry peers for an even deeper educational experience.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Rue Saucin 66
5032 Gembloux
Belgium
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Rue Henri Koch 22
4354 Esch-sur-Alzette
Luxembourg
Phone: +352.558987206
Mobile: -
Fax: +352.559325
Website: www.cnfpc.lu
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course ul. Wiekowej Sosny 15
05540 Zalesie Gorne,Warszawa
Poland
Phone: +48.530813317
Mobile: -
Fax: -
Website: www.knxpolska.org
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Grand'rue 185
6000 CHARLEROI
Belgium
Phone: +32.71419440
Mobile: -
Fax: -
Website: www.cerisic.be
Email: - Link to mapThe CERISIC, which is the research centre of the engineering department of the HELHa College in Belgium, is opening its own KNX training centre. The CERISIC will, in the first instance, certify undergraduates who graduated from the HELHa College in home automation, but also people in continuing education: graduates, electricians, system integrators, or anyone interested in such technology. KNX is the worldwide standard for home and building control. The basic course and the advanced course coming soon allow participants to develop skills to use KNX equipment (control of lighting, heating and air conditioning, energy meter, supervision, gateways to other protocols, multimedia, coupling with connected objects, managing security, etc). Together with advances in home automation technology, the CERISIC would like to develop a new research activity for testing or integrating new componentsApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Rue Sonelgaz 2 villa 419 gué de constantine 419
16000 Alger
Algeria
Phone: +213.21830228
Mobile: -
Fax: +213.21830249
Website: www.cfez-dz.com
Email: - Link to mapDomotic & smart Building has proven itself in terms of electricity and automation and we offer these services to the professional, for buildings project to small apartments For a better energy efficiency, comfort and safety We take care of our clients for advice, engineering, training, programming, commissioning and after sales service, We have experienced engineers in the sector who are able to fulfill the objectives accurately and on time. We love the challenges, we are passionate about KNX and innovation.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course via XIII Martiri 86
30027 San Dona di Piave (VE)
Italy
Phone: -
Mobile: -
Fax: -
Website: www.donboscosandona.it
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course none none
P.O. Box 65-379 Taichung
Taiwan
Phone: -
Mobile: -
Fax: -
Website: www.knxcenter.com.tw
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Rua S. Rosendo 337
4300478 Porto
Portugal
Phone: +351.915363210
Mobile: -
Fax: +351.225362487
Website: www.cinel.pt
Email: - Link to mapCINEL – Training centre for the Electronic Industry, Energy, Telecommunications and Information Technologies was established in 1985 from a partnership between IEFP (Portuguese Institute for employment and training) and ANIMEE (Portuguese Electrical and Electronics Industries Association). We have available 22 laboratories equipped with modern technology in areas such as electronics, robotics, automation and control, renewable energies, telecommunications, networks and computers. CINEL is a KNX Training Centre since November 2010 with two locations – Lisbon (headquarters) and Porto (delegation). Our vision: To build bridges between technology and the future. Our Mission: We have been developing all kinds of Training Courses, in the fields of Electronics, Energy, Telecommunications, and ICT allowing our Trainees to better develop their soft skills and hard skills.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Calle 120A 7-65
01100 Bogota
Colombia
Phone: +57.13000816
Mobile: -
Fax: +57.13000816
Website: -
Email: - Link to mapContact with existing and potential clients Information of the training center on our website Presentation in magazines, fairs and events specialized in automation Presentation at universities and educational centersApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course viale Giacomo Matteotti 425
20099 Sesto San Giovanni
Italy
Phone: +39.226292206
Mobile: -
Fax: +39.02226292335
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Halhi 31 Floor 3
5120052 Bnei Brak
Israel
Phone: +972.546668008
Mobile: -
Fax: +972.35090499
Website: www.control4u.co.il
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course C/ Francisco Brizuela 1
28011 Madrid
Spain
Phone: +34.914635593
Mobile: -
Fax: +34.914644276
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Rafael Solana 88 Col. Independencia Del. Benito Juarez03630 Mexico Distrito Federal
Mexico
Phone: -
Mobile: -
Fax: -
Website: www.knx.mx
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Les Longues-Raies 11
2013 Colombier
Switzerland
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Via Don Minzoni 50
37138 Verona
Italy
Phone: +39.0458070400
Mobile: -
Fax: +39.0458070389
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Kallipoleos Avenue 77
2100 Nicosia
Cyprus
Phone: +357.22806000
Mobile: -
Fax: +357.22376872
Website: http://www.mlsi.gov.cy
Email: - Link to mapTechnical Vocational Training. The CPC provides advanced training in two types of education, short-term training and accelerated initial training programs lasting six months. The specializations offered by the CPC include: Plumbing, Applications, engineering services, Telecommunications - Mobile Telephony, Construction, Engineering, Welding, Industrial Automation etc.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course -
Rue Fontaine St-Pierre 1Fbis
5330 Assesse
Belgium
Phone: +32.83678600
Mobile: -
Fax: +32.83678601
Website: www.dce.be
Email: - Link to mapThe company DCE is specialized in the study and reselling of KNX equipment. It has developed itself towards training courses and ofer different options in that area: • KNX Basic Course • KNX Advanced Course • KNX Tutor Courses Specific training on targeted products DCE proposes KNX trainings in the view of work „in situation“. The trainers being professionals themselves, are focusing their training on the functional side and on concrete applications. Moreover, they offer the possibility of assistance as to the startup of KNX installations. As installers do not always find time for training sessions, DCE offers the option of personalized schedules as well as individual courses. Moreover, training on site is also a possibility if needed. Thanks to this, the customers interested in such training sessions have a great deal of flexibility as and fewer constraints.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Ellemosevej 25
8370 Hadsten
Denmark
Phone: +45.89370100
Mobile: -
Fax: -
Website: http://www.djhhadsten.dk/
Email: - Link to mapAt Den jydske Haandværkerskole we educate and train tomorrows electricians.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Klosterstraße 20
74931 Lobbach
Germany
Phone: +49.6226971206
Mobile: -
Fax: -
Website: www.desi-tec.de
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Damaschkestr. 9
41238 Mönchengladbach
Germany
Phone: +49.2166670878
Mobile: -
Fax: +49.2166670879
Website: www.dewies.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Bahnhofsallee 18
58507 Lüdenscheid
Germany
Phone: +49.235156740
Mobile: -
Fax: +49.23515674410
Website: www.dial.de
Email: - Link to mapDIAL is a centre for light and smart buildings. True to their maxim "Better architecture through light and automation" DIAL passes on knowledge, is engaged in planning and design, provides services and develops software. In the KNX sector DIAL\'s s own trainers, with their many years of experience, pass on their knowledge in seminars and workshops – in both the basic and advanced courses for KNX and in seminars which prepare the learners to become systems experts and even trainers themselves. Each seminar includes many practical exercises in our own laboratory. DIAL does not develop any automation products itself and is absolutely independent of any manufacturer. The basic KNX course includes basic technical knowledge relating to KNX and demonstrates how to use the software tool ETS. Each participant in this seminar receives the ETS USB dongle free of charge in order to be able to startApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Rheinstraße 31
76870 Kandel
Germany
Phone: -
Mobile: -
Fax: -
Website: -
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Örnek Mah. Dutlubahçe Sokak, ATASEHIR 11A
34704 Istanbul
Turkey
Phone: -
Mobile: -
Fax: -
Website: www.dimel.com.tr
Email: - Link to mapDIMEL was established in 1988, an engineering company specialized in electrical and electronic fields and their systems installations with a special emphasis in automation systems. DİMEL was successfully certified as KNX Partner in 1998, and intensively focused on introducing KNX (former, EIB INSTABUS) technology to the Turkish market. Since 1998 DIMEL is a leading company in Industrial Power Engineering field and specialized and excelled in Lighting Control Systems. DIMEL was designated as Certified Training Centre in Turkey as part of KONNEX organization in year 2000. Certification courses are offered in English and Turkish aimed at awarding KNX Partner certificate, since then.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course N San Vicente Blvd 113
BH 90211 Bevely Hills
United States
Phone: +1.3106194850
Mobile: -
Fax: -
Website: www.training-knx.com
Email: - Link to mapFirst training center in the United States with a certified KNX ++ teacher with 10 years of experience in the field in Europe and in the US. Familiar with US building codes and inspectors\' requests. This center will bring you knowledge and share the worldwide experience of many successful projects as well as many products of different manufacturers.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course 15 rue de la Tuilerie ZAC de la Madeleine
77500 Chelles
France
Phone: -
Mobile: -
Fax: -
Website: www.formation-domotique.com
Email: - Link to mapThe demand for installers and system integrators to now become certified on the KNX technology has changed. Today, they want to be closed to their current location and avoid any additional transportation and hospitality costs. Domoconsulting used its national network to provide training in different location all over France. The PARIS center has been created and equipped with the latest version of KNX training kits and products to provide the highest quality of training. Please rest assure that you will leave this class with a real deep knowledge of KNX and be extremely comfortable in programming KNX as well.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Viale Della Vittoria 15/B
38068 Rovereto
Italy
Phone: +39.0464400112
Mobile: -
Fax: +39.0464411018
Website: www.store.domofox.it
Email: - Link to mapDomofox+++ Knx Training center offers all the categories of knx courses in his own work shop or all over the word. Our staff is ready to assist you with any queries regarding the knx world.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course carrera 45 100-12 of 901 edificio Panorama 100
111321 BOGOTA D.C.
Colombia
Phone: +57.3816842
Mobile: -
Fax: +57.13816842
Website: www.knxtrainingcenter.com.co
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course C. Constitución, Planta 2, Oficina 3 2
08960 Sant Just Desvern, Barcelona
Spain
Phone: +34.932418083
Mobile: -
Fax: -
Website: www.domonetio.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Germán Schreiber 276
LIMA 27 Lima
Peru
Phone: +34.932418083
Mobile: -
Fax: -
Website: -
Email: - Link to mapDomonetio has a wide certifiable experience in automation. It was the first training center to offer the KNX Advanced course in blended mode. Today, Domonetio has consolidated its position as one of the main KNX certified training center in the world, with campus in Barcelona and Bogotá. At Domonetio you will find not only KNX certified training but also a set of courses about home and building automation systems that will help you in your business.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Dikberd 34 Unit 1A
2200 Herentals
Belgium
Phone: +32.14720030
Mobile: -
Fax: -
Website: www.domotechnology.be
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course route de Peylon 4
33380 Mios
France
Phone: +33.699243334
Mobile: -
Fax: -
Website: www.domotic-xperience.com
Email: - Link to mapApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course C. Buyssestraat 15
1800 Vilvoorde
Belgium
Phone: +32.22547967
Mobile: -
Fax: -
Website: bouwopleidingen.vdab.be
Email: - Link to mapKNX EducationApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course Av. Nueva Providencia 1881, of 1011
7500520 Santiago
Chile
Phone: +56 2 28857151
Mobile: -
Fax: -
Website: -
Email: - Link to mapDomus main objective is the training and certification of KNX partners, to acquire the necessary skills for the elaboration and integral development of automation projects of houses and buildings.Approved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course -
Tralleon 129
11146 Athens
Greece
Phone: +30.6946796003
Mobile: -
Fax: -
Website: www.e-dreams.gr
Email: - Link to mapworking on thisApproved for:
KNX Basic Course KNX Advanced Course KNX Tutor Course