Find by developer
ABB AC/S Configuration App by ABB Stotz-Kontakt GmbHVersion: 1.0.3
This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.
ABB Automation Builder by ABB Stotz-Kontakt GmbH
This app integrates the software suite ABB Automation Builder into ETS. The Automation Builder is used to create the automation programs for the BAC/S Building Automation Controllers and the ABB AC500 Programmable Logic Controllers (PLC). With this app, the data exchange of the KNX Group Objects defined in the automation programs takes place with the ETS. These app transfer the KNX Group Objects used in the automation programs to the ETS. It supports the BAC/S1.x.1 Building Automation Controllers as well as the ABB AC500 Programmable Logic Controllers (PLC) with activated KNX runtime license (PS5604-KNX).
ABB MOOVnGROUP by ABB France
Graphical studio for KNX integration, offering a graphical, flexible and user-friendly interface based on building layouts. Ideally suited for commercial building, hospitals, hotel automation and any flexible room automation. MOOVnGROUP can template any device of any manufacturer. A device is turned into a collection of objects (ex. lamps, switches, sensors, etc.). Each object can have different usages adjusting its parameters. The objects are then gathered under a zone, which applies Group Addresses templates (with Group Objects). A zone may be an office, a room in hotel, a corridor, a facade, etc. All the templates created can be exported and reused.
ABB MOOVnGROUP Site Capacity 100 by ABB France
ABB MOOVnGROUP Site Capacity 1000 by ABB France
ABB MOOVnGROUP Site Capacity 2000 by ABB France
ABB MOOVnGROUP Site Capacity 250 by ABB France
ABB MOOVnGROUP Site Capacity 500 by ABB France
ABB MOOVnGROUP Site Capacity 5000 by ABB France
ABB SUG/U 1.1 Configuration by ABB Stotz-Kontakt GmbH
This App is needed for configuration of the ABB SUG/U 1.1 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application. All SUG/U 1.1 in the project can be processed at the same time. The download into the device is done by normal ETS download.
ABB Update Copy Convert by ABB Stotz-Kontakt GmbH
This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project. The functions are: Update: Changes the application program to a later or earlier version while retaining current configurations. Convert: Transfers/adopts a configuration from an identical or compatible source device. Channel Copy: Copies a channel configuration to other channels on a multichannel device. Channel Exchange: Exchanges configurations between two channels on a multichannel device. Import/Export: Saves and reads device configurations as external files.
AutoBackup by IT Gesellschaft für Informationstechnik mbH
This App will automatically create a snapshot of your ETS project (as knxproj) in a specified, project-specific location. This is useful if you are working with several projects and want to - include versions of the projects in a backup solution - synchronize the versions with a cloud service (e.g. Dropbox®) - deploy the project to a location accessible by other persons or tools ETS5 has a similar facility named "recovery points". In contrast to the AutoBackup App, recovery points are not stored in project-specific folders and thus do not provide client isolation.
Baos Csv Importer by Weinzierl Engineering GmbH
The Weinzierl BAOS CSV Importer is an easy way to export the existing configuration of a generic BAOS database to a CSV file and import it into another project. This eliminates the need for tedious manual configuration. The Weinzierl BAOS CSV Importer is available for all Weinzierl BAOS devices with a generic ETS product database.
BJE 6186/40 Configuration by Busch - Jaeger Elektro GmbHVersion: 1.0.25
This App is needed for configuration of the BJE 6186/40 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application. All 6186/40 in the project can be processed at the same time. The download into the device is done by normal ETS download.
BJE Update Copy Convert by Busch - Jaeger Elektro GmbH
Carel KSet by Carel Industries S.p.A.Version: 0.5.2017.103
DCA to set the mapping between KNX datapoints and Modbus registers
Check and Improve by IT Gesellschaft für Informationstechnik mbH
"Check and Improve" helps you ensure and improve the formal quality of your ETS projects. This includes the verification and semi-automatic correction of spelling, configurable naming conventions, and the assignment of Datapoint types. Without much effort, the project gets more clearly arranged, better maintainable and will be the perfect base for further use, e.g. for a visualization. Some details: The Spell checker can make use of many freely available dictionaries in lots of languages e.g. from the OpenOffice and Mozilla projects, plus user dictionaries for additional words. The naming conventions can be defined by combining building blocks like "alternative", "concatenation", "list of allowed names", "list of names from project", "pattern" etc. to a rule. The Datapoint type assignment has access to an online database with information currently about approx. 1000 application programs (continuously growing).
CODESYS KNX by 3S-Smart Software Solutions GmbH
Control4 Split Unit Gateway by Control4 CorporateVersion: 1.0.27
This App is needed for configuration of the Control4 C4-KNX-SUAC Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application. All SUG/U 1.41 in the project can be processed at the same time. The download into the device is done by normal ETS download.
Control4 Update Copy Convert by Control4 CorporateVersion: 1.0.85
The app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project. The functions are: Update - Changes the application program to a later or earlier version while retaining current configurations. Convert - Transfers / adopts a configuration from an identical or compatible source device. Channel Copy - Copies a channel configuration to other channels on a multi-channel device. Channel Exchange - Exchanges configurations between two channels on a multi-channel device. Import / Export - Saves and reads device configurations as external files.
DaliControl Gateway DALI16 by MDT technologies GmbH
DCA for commissioning the MDT DaliControl Gateway DALI16 or the MDT DaliControlGateway32. This DCA can be used to commission and configure the DALI devices. The DALI subscribers can be assigned to the various groups and scenes and time controls can be implemented. For more information: http://www.mdt.de
DALIControl gc16 by IPAS GmbHVersion: 184.108.40.206
Device Configuration App (DCA) for IPAS DALIControl gc16 (1 or 2 Channel) Order No.: 4101-145-11, 4101-145-21 Application: DaliControl gc16-01-0110, DaliControl gc16-2-01-0110 Coloured light control including device type 8 ECGs: Colour temperature (DT-8 Sub-Type TC) XY colour (DT-8 Sub-Type XY) RGB (DT-8 Sub-Type RGBWAF) HSV (DT-8 Sub-Type RGBWAF) RGBW (DT-8 Sub-Type RGBWAF) HSVW (DT-8 Sub-Type RGBWAF)
Device Compare by KNX Association
With ETS App Device Compare you can compare the an individual device from the installation with the available data in the corresponding ETS project. In this way the current state as in the installation can be compared with the expected state as in the ETS project. Dissimilarities in device configuration will be shown and the result can also serve as evidence in case a third party has tampered with the installation.
eConfigure KNX Expert by Schneider Electric Industries S.A.
‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building. ‘eConfigure KNX’ is supported in Germany, France, Italy, Denmark, Sweden, Finland, Russia, Belgium, Chili and Portugal. Please find the product catalog: https://exchangecommunity.schneider-electric.com/community/lighting-room-control/econfigure Note: ETS5 Professional is required.
eConfigure KNX Expert Student by Schneider Electric Industries S.A.
‘eConfigure KNX Student’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building. ‘eConfigure KNX’ is supported in Germany, France, Italy, Denmark, Sweden, Finland, Russia, Belgium, Chili and Portugal. Please find the product catalog: https://exchangecommunity.schneider-electric.com/community/lighting-room-control/econfigure
EI_Import by Nautibus engineering
Electrical installation Import EI Import generates an ETS5 project from a CSV list of actuators and circuits. The list can easily be created using Excel or a text editor. The project produced contains all the necessary group addresses, the building structure and the actuators. It can be further processed with the ETS5 or EIplan5.
EIBlib/IP by KNX Association
Reactivates the protocol EIBlib/IP in ETS (not standardised and since KNXnet/IP redeemed). With this ETS App the establishment of an ETS connection using with this protocol is again possible.
EiDoc5 by Nautibus engineering
With EiDoc5, the ETS5 is expanded by an automatic documentation generator, which can print out a detailed project documentation. With EiDoc5 all ETS projects can now be expanded with a graphical and extensive documentation. With the new postprocessing assists, the necessary information can be supplemented in old ETS projects and ground plans can be added. Projects created with EiPlan5 need no rework and can be printed immediately. EiDocc5 creates ground plans with the installation planning, distribution plans, wiring diagrams and parts lists in a PDF document.
EiPlan5 by Nautibus engineering
The EiPlan app extends the ETS with floor plan-controlled project generation. Lamps, sockets, blinds, heating circuits, etc. are placed in the floor plan by mouse. EiPlan generates all required group addresses, which are automatically assigned to the appropriate actuators. The rockers of the buttons are also assigned by mouse click. This creates a well-structured ETS project, along with installation and distribution plans. KNX devices can be selected from the ETS catalog. These are saved with settings and can be reused in other projects. EiPlan5 generates all data for the free visualization EiVisu. A free demo version can be found on nautibus.de
ERA INN KNX interface by Nice Spa
DCA for configuring ERA INN KNX interface DIN module.
ETS App Device Editor by KNX Association
Using ETS App Device Editor, the KNX Members cannot only read out the memory of a KNX device, but they can also modify the contents of unprotected memory blocks. This is very important when e.g. a device is under testing by the manufacturer in a real installation environment and the test engineer wants to manipulate the memory of the device to check its functionality without the need to create a new product database using the Manufacturer Tool. [Video presentation (EN)](https://www.youtube.com/watch?v=e53imoJJSsw)
ETS App Device Reader by KNX Association
The ETS App Device Reader can be used in order to read out the memory and the properties of devices, which will provide the user with crucial and possible clarifying information. This information can also be saved as a file. [Video presentation (EN)](https://www.youtube.com/watch?v=OhtrWky1aOY)
ETS App Replace Unreg by KNX Association
Test the Application Programs in an ETS project (e.g. in your company's Quality lab) and replace them with a newer/updated version from your development directly in the ETS project (by keeping the parameters/associations). The certification status of the Application Program is not considered on this replacement, this is in contrast to the already in ETS4/5 available (identical) functionality, which is the major difference of this ETS App! Please read the details in the in the attached PDF document.
ETS App Training Centre Tool by KNX Association
The ETS App Training Centre Tool allows multiple unloading of Individual Addresses of devices in an installation without pressing their programming button. Only available for Training Centres. [Video presentation (EN)](https://www.youtube.com/watch?v=QYfXali-2cE)
Export for IP-Project by Busch - Jaeger Elektro GmbHVersion: 220.127.116.11
This ETS App is intended to exchange Group Address information of Busch-ComfortTouch® panels from Busch-Jaeger or ABB between ETS and IPP. The ETS App provides IPP data with recent changes in ETS and vice versa ETS data in IPP. By pressing the import button you can import XML files that were created by IPP into ETS. Using the export button you can generate an XML file for import into IPP.
Extended Copy by KNX Association
The ETS App Extended Copy is used to quickly create similar structures in a project. During the copy process, a dedicated dialog will allow devices, bus lines, even complete building parts together with their destination address assignments, configuration, Group Addresses, links, text descriptions and other information to be adjusted. Thereafter, the configuration is inserted seamlessly.
Fill Visualization Dummy by IT Gesellschaft für Informationstechnik mbH
For full system visualisation, telegrams shall be allowed to pass the line coupler. To this end, a dummy device is inserted in the ETS project. It contains all the Group Addresses required by the visualisation system. The ETS takes the Group Addresses from the dummy device into account when creating the filter tables. Fill VisualizationDummy helps you to link a dummy device in the ETS with a list of Group Addresses for a visualization. Product data for dummy devices can be obtained from several manufacturers. The information about the group addresses can be read either from a file (different formats are supported), or the group addresses can be selected from the current ETS4 project by drag and drop.
Function Test by IT Gesellschaft für Informationstechnik mbH
The ETS App Function Test supports you in function test / acceptance of a finished KNX project: - At any time, it is clearly visible which functions are tested and with which result. - The results can be printed as report. - For the function types Switching, Dimming, Sun protection and Heating, pre-defined "Mini-Visualizations" are available making it easy to view and modify the current states. - It is possible to control the App from iOS or Android-based mobile devices with the help of the "Elvis Viewer" app.
GAMMA Converter App by Siemens AGVersion: 1.3.2288
GAMMA Converter App is used to exchange applications of Siemens products automatically. It expands the basic functionality of the GAMMA Converter Tools with the feature, to exchange the application within the ETS automatically. Therefore the App uses for converting the data the KNX Converter Libary of Siemens, which can be downloaded for free. The exchange of applications is possible in case of a single product or from more products to one product. More information about supported applications and products: http://www.siemens.com/gamma-converter
Griesser GPA by Griesser Electronic AG
The Griesser GPA (Griesser Protocol Analyzer) app can decode, record and save KNX bus telegrams of the type 6-byte Griesser object. The GPA app works as a supplement to the Bus or Group Monitor integrated in the ETS. The Griesser GPA app must be launched separately from the Bus or Group Monitor and simultaneously records all KNX telegrams. As it does so, the Griesser object telegrams are recorded in decoded form. The GPA app offers the same functions as the Bus and Group Monitor except that it interprets the proprietary Griesser 6-byte object and decodes the sectors, the priority and the command.
Griesser JAX DCA by Griesser Electronic AG
Griesser offers innovative configuration options. Using a tile system, functions are «stacked» according to their priority. This is similar to the list of priorities in a requirements specification. Despite the high degree of flexibility, no programming language has to be learned because the intuitive tiles are configured in the predefined and tested scope. Each tile also contains «its own» communication objects and specific settings options. After successful configuration, the functionality can be tested online and the individual statuses of each tile can be graphically visualized.
Hager/Berker Easy2ETS by Hager Controls
Easy2ETS tool can be used to read out an installation made of Easy Hager and Berker devices configured with TXA100 and to take over the configuration with ETS. Note: - RF Devices cannot be read out. - Bus access and ETS products data are required (product database).
KNX Bus Update by Busch - Jaeger Elektro GmbH
The ETS app “KNX Bus Update” serves for the firmware update of various Busch-Jaeger KNX devices via the ETS (Engineering Tool Software). The current firmware files can be downloaded automatically from the Internet. The app can be used with ETS4 or higher.
KNX Bus Update by ABB Stotz-Kontakt GmbH
The ETS app “KNX Bus Update” serves for the firmware update of various ABB KNX devices via the ETS (Engineering Tool Software). The current firmware files can be downloaded automatically from the Internet. The app can be used with ETS4 or higher.
KNX DALI-Gateway Basic REG-K by Schneider Electric GmbH c/o Merten
KNX DALI-Gateway Basic REG-K by Schneider Electric Industries S.A.
KNX RF Field Strength Analyzer by Tapko Technologies GmbH
The KNX RF Field Strength Analyzer (KNX-RF-FSA) app is taking the innate uncertainty of KNX RF installations. By gathering the Received Signal Strength Indicators (RSSI) of all user-selected RF devices and displaying them in a colour-coded matrix, the KNX-RF-FSA makes testing and debugging of KNX RF device connections easier than ever before. Designed to be used for short and long-term observations of the device’s RSSIs, the KNX-RF-FSA is a high-quality tool that can highlight any weaknesses in a KNX RF installation. This tool also tests the functionality of activated repeater for increased area coverage to avoid future problems. The RF FSA is all you need for successfully commissioning your KNX RF installation. Available in MyKNX.
KNX-Gate Sync by Insta GmbHVersion: 0.0.8.0
This app synchronizes the KNX-Gate 3 projects of the Insta KNX Gateway RS232/485-IP with an ETS Project.
KNX/DALI Gateway Data Import by Siemens AG
This ETS App allows to import configuration data for Siemens KNX/DALI Gateway over MS Excel XLSX or CSV file. Therefore you can import data created by planning tools. This ETS App creates and fills automatically one or more devices based on a XLSX/CSV file. The effort to add ECG and parameters will be reduced a lot.
KNXMCM BAline Studio Exchange by WAREMA Renkhoff SEVersion: 18.104.22.168
With the “KNXMCM BAline Studio Exchange” ETS app, CSV files that were previously generated in BAline Studio can be imported to ETS. These files contain information about names and types of objects and the direction of data flow, which were set in BAline Studio projects. With “KNXMCM BAline Studio Exchange” the settings on KNX devices can be easily made so that the corresponding BAline Studio Project can run perfectly on these devices. “KNXMCM BAline Studio Exchange” can in each case be run for only one device. If a receiver heartbeat was set up for group objects in BAline Studio, a message appears in the “Information” field.
KNXPM Project Management by Sudoku Innovation
KNXPM is an ETS App that enhances the performance of the KNX Partners by connecting the best techniques in Project Management with your KNX daily work. * Check the progress of your project in one quick view. The dashboard will highlight the most important information. * Follow-up with the tasks in a categorized way, their progress, what equipment is related to each task, labour logs, outsourced tasks... * Keep track of the budget and stock of KNX devices, non-KNX equipment and installation material. * Export information targeting different stakeholders. * Powerful tools such as “Earned Value Method” and “Critical Path Method”. Languages: English, Spanish, German, Swedish.
Labels by KNX Association
With the ETS App Labels, device labels based on forms can be printed as stickers. The information (Individual Address, mounting, function, etc.) is taken directly from the ETS project. This not only facilitates the work of the installer or system integrator, but also provides consistent overview within distribution boards and cabinets. Please note that an installed version of Microsoft Word is needed for printing the labels.
Long-term Recorder by KNX Association
With the ETS App Long-term Recorder, you can open files with recorded telegrams, which have been recorded using the tool ETS Satellite Recorder that is made available once you purchase the App.
MDT Glastaster Smart by MDT technologies GmbH
MDT RF+ Reichweiten Check by MDT technologies GmbH
The APP MDT RF + Range Check is a useful tool for the analysis and planning of KNX radio installations according to the new RF + standard. The tool helps you to plan the installation location for new installations as well as to analyze and correct problems in existing radio installations. The MDT RF + Range Check shows you in a simple graphical matrix which connections are critical. Long-term analyzes are also possible to identify external interference sources. The repeater functionality of the RF + devices can also be examined and evaluated with this tool.
My Product Templates by KNX Association
With the ETS App My Device Templates you can configure devices in your project, save the configuration as template and then reuse it in other projects as well so that you do not have to configure the devices again and again in the same way.
NETx BMS App by NETxAutomation Software GmbH
To import the configuration of a KNX project into a management application like an OPC server, the ETS offers an export function called "Export OPC". This export functionality provides only basic information about the KNX installation. The NETx BMS App is a user-friendly way to import the whole KNX project and its meta-information into the NETx BMS Server or the NETx KNX OPC Server. The output of this ETS App is an enhanced export file that contains the used KNX Group Addresses, the deployed KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and Group Objects) as well as the building and trade view. In addition, the App detects the configured IP addresses of the KNXnet/IP routers and interfaces. Based on the topology of the KNX project, the App automatically assigns the KNX Group Addresses to the routers and interfaces that are later on used for accessing them. Thus, a manual, time-consuming and error-prone assignment of the KNX Group Addresses to the KNXnet/IP routers and interfaces is not necessary anymore. Using the NETx BMS App, the whole KNX project including the well-known ETS view can be imported into the NETx BMS Server or NETx KNX OPC Server in a fast and intuitive way.
NETx BMS App Secure by NETxAutomation Software GmbH
The NETx BMS App Secure is a user-friendly way to import the whole KNX project and its meta-information into the NETx BMS Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. Compared to the standard NETx BMS App, the NETx BMS App Secure also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.
Online KNX Product Catalog by KNX Association
Due to the success of KNX, also the range of available KNX products is extending. The applications that need to loaded into KNX devices, can be downloaded from the individual KNX member company websites. This task a such can be very cumbersome. With the ETS App "Online KNX Product Catalog" this situation has changed, the required product catalogs can now be retrieved from within ETS4. The offered product catalogs can differ by manufacturer, language and availability per country. It is no longer necessary to download complete product catalogs. This ETS App is especially interesting for beginners and regular users.
PAF-X by SIRLAN Technologies
Project Data Exchange by IT Gesellschaft für Informationstechnik mbH
Project Diff by IT Gesellschaft für Informationstechnik mbH
Compare your current ETS project with an earlier version of the project (knxproj file or restore point) and get a detailed list of all differences for each individual project element. Jump directly from the difference list to the corresponding element. Many options control details of the comparison.
Project Tracing by KNX Association
With the ETS App Project Tracing, all changes made in projects (except changes that have been made by device plug-ins) are registered in chronological order and are locked with a password. This App can also serve to monitor the progress of projects under construction.
Reconstruction by IT Gesellschaft für Informationstechnik mbH
The Reconstruction tool can be used to read out devices in the installation and then create a new ETS project or update an existing project. You may also compare the data from the installation against an ETS project. This allows to work on projects where the ETS database has been lost or is out of date. This will also work for installations which were created with a previous version of ETS. These items can be reconstructed: topology, devices with individual address, application program, parameter settings and group object flags, priority and assigned group addresses. You need bus access and same product data which were used to program the devices. Building or trade structure as well as name and description texts of areas, lines, devices and group addresses will not be reconstructed because they were not programmed into the device. Note: Devices with plug-ins can only be read out / reconstructed, if supported by the manufacturer of the plug-ins. In case of doubt please contact the manufacturer or our support. Devices which product data cannot be used in the current ETS can not be reconstructed. For more info see http://www.it-gmbh.de Products - KNX-Software - ETS Apps
Replace Device by KNX Association
With the ETS App Replace Device, you can replace KNX devices while keeping their Group Addresses. This is possible for devices with similar functionality, regardless of the manufacturer.
Shift Addresses by IT Gesellschaft für Informationstechnik mbH
Shift Addresses helps you to re-structure Group Addresses and Individual Addresses in an ETS project, e.g. - Shift addresses to make room for a new function but still keep an established addressing scheme - Create gaps between addresses to allow for future extensions or to produce a clean and logical addressing scheme
SIEMENS Address by ID by Siemens AG
Users can program the individual address of a KNX device by using the KNX serial number. Siemens offers selected products with removable labels printed with the unique KNX serial number on. In practical work the installer of a KNX device can fix the label to the device in the installation plan. So later on the ETS expert can program the KNX device without pressing the programming button. Therefore the KNX serial number is labeled as bar-code, it is possible to use a bar-code scanner.
SIEMENS KNX2S7 Export by Siemens AGVersion: 1.0.2409
Siemens offers the possibility to exchange data from SIMATIC S7 PLC to KNX systems via KNXnet/IP interfaces. This ETS App enables the user to export a Group Address data (Main addresses 0-15) from ETS in a CSV file which can be imported to Siemens KNX2S7 Editor. The additional available KNX2S7 Editor creates required data for SIMATIC S7.
Split & Merge by KNX Association
With the ETS App Split & Merge, a project can be split into two, three or more parts. Several ETS users can edit them independently and merge again them after completion of the entire project. This works also with unrelated projects, so that it can be merged.
terminal-App by Alexander Bürkle GmbH & Co. KGVersion: 22.214.171.124
With terminal-App you can import KNX projects from terminal, the universal online configurator. In addition to the requirement specification generated by terminal, you can import floors, rooms and group addresses directly to your ETS project. [Terminal-Konfigurator](http://www.terminal-konfigurator.de)
Timberwolf Importer by Elaborated Networks GmbHVersion: 4.0.1065.0
The Timberwolf Server has a few thousand universal objects, which are deactivated by default. To be able to use a Group Object it has to be released by choosing its data type from a list in the application for the corresponding object. The group object may then be linked with Group Addresses. The Timberwolf Importer App simplifies this process by uploading a control file containing Group Addresses with data type and optional Group Object numbers to be released. This control file can be exported from a Timberwolf Server or a WireGate Server or can be created by hand.
Trebor KNX Visualizer Server by Trebor Automation AB
Update Tool by MDT technologies GmbH
Web Service Exporter by KNX AssociationVersion: 0.0.1.0
Demonstration of the KNX Web service information model. Allows to create an XML file with the KNX information model from an ETS project. The exported project can be used with the KNX Web service gateway demo.