Zur Startseite

KNX Schulungszentren finden

So finden Sie ein zertifiziertes KNX Schulungszentrum in Ihrer Nähe: Klicken Sie auf das Feld „Land“, um die Liste der Schulungszentren nach Ländern zu sortieren.

KNX Schulungszentren in

Show KNX Training Centres offering:

             

Suchen nach

Schulungszentrum Name
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • #
  • -

    Centro Comercial Las Américas, modulo A8, Av. El Vedat 180
    46900 Torrente
    Spain

    Phone: +34.658962501
    Mobile: -
    Fax: -
    Website: www.knxcenter.es
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    kaserntorget 6
    411 18 Göteborg
    Sweden

    Phone: +46.317575020
    Mobile: -
    Fax: -
    Website: http://www.2ctrl.se
    Email: -
    Link zur Karte

    We are a KNX based agency in Sweden promoting various KNX products on a daily basis. We work with installers, integrators and property owners helping them to find smarter, more efficient, open solutions and train them in maintenance and programming. KNX Basic Course and KNX Advanced Course
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Dragana Rakica 20E
    11080 Zemun
    Serbia

    Phone: +381.628890297
    Mobile: -
    Fax: -
    Website: http://www.siping.rs
    Email: -
    Link zur Karte

    “ŠIPING ltd” Company was founded in 2008 since it has an active role in domestic and foreign market in all areas of services delivery design and construction of works. The primary business is the design and execution of all electrical and mechanical installations, which are used in different types of buildings (residential business, sports, health and facilities for special purposes, such as gas stations, telecommunications facilities, radio-base stations of mobile operators, etc.). The specific requirements of the market, which are reflected in the variable and periodic need for a certain type of activities, have contributed that “Šiping ltd” Company in addition to core business, develop in several directions. Pursuant to the requirements has been established the department that deals with the building automation systems based on KNX standard.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Paragwgikotitas 28Β
    2326 Lakatamia Industrial Area, Nicosia
    Cyprus

    Phone: +357.22875225
    Mobile: -
    Fax: +357.22875226
    Website: www.electricalcy.com
    Email: -
    Link zur Karte

    The Training Center Σ.Ε.Η.Κ. has the objective of coordinating, managing and implementing of vocational education, training and education programs. The aim of the Σ.Ε.Η.Κ. is to offer education and training services at the highest level with measurable results.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course
  • A

    Blackburn Road 601
    3168 Notting Hill
    Australia

    Phone: +61.385777139
    Mobile: -
    Fax: -
    Website: www.abbaustralia.com.au
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Dr Mohamed Kamel Hussein St. 7
    5040 Heliopolice West 11771 Cairo
    Egypt

    Phone: +202.26251732
    Mobile: -
    Fax: +202.26222667
    Website: www.abb.com/knx
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Al Ahsa Street, Al Malaz P. O. Box 325841
    11371 Riyadh
    Saudi Arabia

    Phone: +966.114845627
    Mobile: -
    Fax: +966.12651211
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    ThinkPark Tower 22F 2-1-1 Osaki Shinagawa-Ku
    141-6022 Tokyo
    Japan

    Phone: +81.357846257
    Mobile: -
    Fax: +81.357846260
    Website: http://www.abb.co.jp
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Frankeneng 15
    6716AA Ede
    Netherlands

    Phone: +31.318669300
    Mobile: -
    Fax: +31.318631718
    Website: www.abbconnect.nl
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Kangxin Highway 4528
    201319 Shanghai
    China

    Phone: +86.02123288742
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    ABB KNX training Centre is based in Shanghai, which will be opened to all the engineers and designers who are interested in KNX. We provide basic training of KNX. http://www.abb.com.cn/cawp/cnabb057/ec5ecde08b9eff3348257ce5000afb31.aspx
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Peenya Industrial Area Phase 2 Plot No 5 & 6,
    560058 Bangalore
    India

    Phone: +91.8022948543
    Mobile: -
    Fax: +91.9845629601
    Website: www.abb.com/in
    Email: -
    Link zur Karte

    We conduct KNX certified courses as well as KNX product & application trainings.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Jacob Borchs gate 6
    3012 Drammen
    Norway

    Phone: -
    Mobile: -
    Fax: -
    Website: www.abb.no/KNX
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Ayer Rajah Crescent 2
    139935 Singapore
    Singapore

    Phone: +65.96388142
    Mobile: -
    Fax: +65.67765711
    Website: abb.com
    Email: -
    Link zur Karte

    Training Centre for RCC (Regional Competency Centre) located in Singapore to serve Asia ABB market. To help to promote KNX solution and give Basic and Advance KNX Training to all ABB Staff, System Integrator and Customer.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Resslova 3
    46602 Jablonec Nad Nisou
    Czech Republic

    Phone: +420.731552383
    Mobile: -
    Fax: -
    Website: www117.abb.com
    Email: -
    Link zur Karte

    Training and presentation company ABB and system KNX
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Via Ardeatina 2491
    00040 Roma
    Italy

    Phone: +39.290347789
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    In 2010 ABB launched in Italy its KNX certified training center in Vittuone, contributing to spread KNX Building Automation knowledge and expertise all over Italy, among different customers. More than 70 people attended KNX basic course becoming KNX partner. Now it has become available a second KNX certified training center in ABB factory in S.Palomba, near Rome, in order to facilitate spread of KNX also in center-southern part of Italy, allowing people to access more easily KNX training sessions and to become KNX partner. The training room is fully equipped with different KNX devices in order to cover all building automations applications such as lighting, shutters, HVAC systems; from the basic ones to the advanced ones such as constant lighting control, DALI lighting, energy&load management, security&safety, visualization and centralized control.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Viale dell'Industria 18
    20010 Vittuone (Milan)
    Italy

    Phone: +39.0290347789
    Mobile: -
    Fax: -
    Website: www.bol.it.abb.com
    Email: -
    Link zur Karte

    In 2010 ABB launched in Italy its KNX certified training center in Vittuone, contributing to spread KNX Building Automation knowledge and expertise all over Italy, among different customers. The training room is fully equipped with different KNX devices in order to cover all building automations applications such as lighting, shutters, HVAC systems; from the basic ones to the advanced ones such as constant lighting control, DALI lighting, energy&load management, security&safety, visualization and centralized control.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Brown Boveri Platz 3
    5400 Baden
    Switzerland

    Phone: +41.585860000
    Mobile: -
    Fax: +41.585860601
    Website: www.normelec.ch
    Email: -
    Link zur Karte

    ABB ist ein global führendes Technologieunternehmen in den Bereichen Elektrifizierungsprodukte, Robotik und Antriebe, Industrieautomation und Stromnetze mit Kunden in der Energieversorgung, der Industrie und im Transport - und Infrastruktursektor. Aufbauend auf einer über 125-jährigen Tradition der Innovation gestaltet ABB heute die Zukunft der industriellen Digitalisierung und treibt die Energiewende und die Vierte Industrielle Revolution voran. Das Unternehmen ist in mehr als 100 Ländern tätig und beschäftigt etwa 132ʼ000 Mitarbeitende, davon 6ʼ000 in der Schweiz. In unserem hauseigenen zertifizierten Trainingszentrum bieten wir ein umfangreiches Weiterbildungsangebot an.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Eppelheimer Straße 82
    69123 Heidelberg
    Germany

    Phone: +49.62217011234
    Mobile: -
    Fax: +49.6221701630
    Website: www.abb.com/knx
    Email: -
    Link zur Karte

    ABB ist in über 100 Ländern mit mehr als 140.00 Mitarbeitern vertreten. Als eines der weltweit führenden Technologieunternehmen ermöglichen wir es unseren Kunden, Energie effizient zu nutzen, die industrielle Produktivität zu steigern und gleichzeitig die Umweltbelastung zu reduzieren. ABB STOTZ-KONTAKT GmbH in Heidelberg, entwickelt, fertigt und vertreibt Produkte für die elektrische Ausrüstung und Automatisierung von Gebäuden, Maschinen und Anlagen.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Arnöleden 2
    60129 Nyköping
    Sweden

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Rue des Prés Seigneurs ZA la Boisse 300
    1124 Montluel
    France

    Phone: +33.437404295
    Mobile: -
    Fax: +33.437404466
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Organize Sanayi Bölgesi 2 cadde No:16
    34776 Y.dudullu,Istanbul
    Turkey

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Emil Neckelmanns Vej 14
    5220 Odense SO
    Denmark

    Phone: -
    Mobile: -
    Fax: -
    Website: www.abb.com/dk
    Email: -
    Link zur Karte

    KNX training is performed at ABB Odense, Fyn, Denmark
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    3rd Street, Al Quoz, 4th Interchange, Sheikh Zayed Ro
    11070 Dubai
    United Arab Emirates

    Phone: +971.43147584
    Mobile: -
    Fax: +971.43401539
    Website: www.abb.com/knx
    Email: -
    Link zur Karte

    ABB KNX Certified Training Center in the United Arab Emirates
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Molino de las Fuentas s/n
    46026 Valencia
    Spain

    Phone: +34.963357362
    Mobile: -
    Fax: +34.963357315
    Website: cfv.adif.es/campusffe
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Av. Monsenhor Ângelo Sampaio 377
    56330-300 Petrolina
    Brazil

    Phone: +55.8732026008
    Mobile: -
    Fax: -
    Website: www.treinamentoknxbrasil.com.br
    Email: -
    Link zur Karte

    Advantis Soluções em Eletricidade is a fully engaged company to the development of the KNX system in Brazil. Working as a training center, we have the great expectation of graduate a big quantity of students in the KNX field, or even work as a support in consulting KNX big projects.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Knappenweg 34
    6600 Pflach
    Austria

    Phone: -
    Mobile: -
    Fax: -
    Website: www.aec-tech.at
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    du molinel 6
    59169 cantin
    France

    Phone: +33.608419622
    Mobile: -
    Fax: -
    Website: http://www.afpa.fr
    Email: -
    Link zur Karte

    The center of AFPA (Agency for the vocational training of adults) to DOUAI CANTIN provides training to approximately 2 500 students per year in the sectors of industry, building, construction and service. It offers a range of type NVQ 1 level, 2, 3 course of training leading to a certified national diploma of Government. Building automation and electricity technician which is operational since 2006 training course includes training the technician electricity General program. The course is based on the KNX Protocol. Students using a range of specifications developed offers, setting the parameters for buildings intelligent automation wiring and installation. Students carry out practical work on specifically recreated in training situations. They use the ETS software program: switching and lighting variation, shutters and blinds, control, thermal management and various other sy...
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    chemin de la clue -
    13011 MARSEILLE
    France

    Phone: +33.608609780
    Mobile: -
    Fax: -
    Website: Afpa.fr
    Email: -
    Link zur Karte

    The AFPA centre Marseille la Treille The KNX standard: Passport to employability The AFPA (Association for adult vocational training) centre in Marseilles La Treille provides training for around 2,400 trainees per year in industry, construction and service industry sectors. The building automation and electricity technician training course which has been operational since 2006 includes general electricity technician training as part of the programme. The course is based on the KNX protocol. Trainees using a range of specifications draw up offers defining the parameters for intelligent building automation cabling and installation. Within the scope of the issue of the energy efficiency in intelligent buildings, the B.A.E.T (building automation and electricity technician) course covers trainee projects where the objective is to design user-friendly energy-saving installations.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Bin Mahmoud22652 Doha
    Qatar

    Phone: +974.66315375
    Mobile: -
    Fax: -
    Website: www.almazrouicas.com
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Office 301, Reef Tower, Plot no. O1, Jumeirah Lakes Towers77391 Dubai
    United Arab Emirates

    Phone: +971.44240100
    Mobile: -
    Fax: +971.44230741
    Website: www.almazrouicas.com
    Email: -
    Link zur Karte

    These courses provide the knowledge and skills that enable participants to become advance level accredited KNX building automation technicians. KNX is a worldwide standard for home and building control automation and these courses will allow participants to develop skills to work on KNX basic and advanced equipments (Lighting control, Blind control, Heating control, Security technology, Visualization systems, ...) to a level of a basic and an advance understanding. The full KNX accreditation requires successful completion of the advanced training course in addition to the basic training course. These courses are ideal for electrical contractors, electricians, building automation engineers and system integrators.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Beckstrasse 3
    69412 Eberbach
    Germany

    Phone: +49.6271919470
    Mobile: -
    Fax: +49.6271919479
    Website: http://www.busbaer.de
    Email: -
    Link zur Karte

    The Alexander Maier GmbH training centre helps integrators establish a strong base level of knowledge, on which they can continue to develop with confidence.As you attend our various training courses, you and your business will gain the knowledge and expertise to exceed customer expectations and deliver successful projects. We have been a Certified Training Centre KNX since 2001, which means that we are entitled to conduct the KNX Basic Course as well as the KNX Advanced Course and KNX Tutor Course. We are manufacturer-independent and also offer other specialized and monographic KNX seminars. After teaching more than 1.500 integrators, our KNX Trainers have quite a large and positive expertise. Please, contact us for customized training (groups of at least 8 people) at .
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Buchenweg 11
    8442 Hettlingen
    Switzerland

    Phone: +41.522651000
    Mobile: -
    Fax: +41.522651009
    Website: http://www.all-com.ch
    Email: -
    Link zur Karte

    Als integrale Planer deckt die Firma All-Com AG sämtliche Dienstleistungen rund um die KNX-Gebäudetechnik im Wohn- und Zweckbau ab. Von der Erstberatung über die Konzeption bis zur Umsetzung kundenorientierter Lösungen. Jedes Projekt beginnt mit einer fundierten Analyse der Bedürfnisse und Prozesse. So entstehen individuell massgeschneiderte Projekte, die von der ersten Idee bis zum wirtschaftlichen Betrieb den Kunden Freude machen. Die Firma All-Com AG sieht sich zudem als Ihr Partner für Planung und Beratung im Kompetenzfeld Telekommunikation, WLAN und Multiroom-Audio. Wir wahren die Interessen unserer Auftraggeber - neutral und unabhängig von Systemen und Produkten. Zusammen mit unseren Partnern finden wir für jede Aufgabe die optimale Lösung. Um das Leistungsangebot abzurunden, bietet die Firma All-Com AG ab Juni 2015 KNX-Grundkurse inklusive Zertifizierung an.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Entenza 95 5a
    8015 Barcelona
    Spain

    Phone: +34.932153195
    Mobile: -
    Fax: +34.932154264
    Website: www.amaisys.com
    Email: -
    Link zur Karte

    Amaisys Training Center is a space for the exchange of knowledge and the innovation, oriented to support all the professionals of the industrial and building sectors. Our training portfolio includes KNX Partner, Advance and Tutor programs and services for continuous learning: on-site and online. As main feature, we are the only center worl-wide that offers KNX Online Training with remote access to real KNX devices during the learning sessions. For more information, please, visit www.amaisys-training.com or contact us at .
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Sos. Dudesti-Pantelimon 19, sect. 3
    33091 Bucharest
    Romania

    Phone: +40.215390153
    Mobile: -
    Fax: +40.318176173
    Website: www.amavys.ro
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Ellermanstraat 33
    2060 Antwerpen
    Belgium

    Phone: +32.475370016
    Mobile: -
    Fax: -
    Website: https://www.ap.be/
    Email: -
    Link zur Karte

    The KNX Training Centre is part of the AP University College Antwerp, Department of Science and Technology. KNX is available for professional Bachelor students such as Energy Managers & HVAC-technicians (Electromechanics). The Training Centre is fully integrated in the building across several laboratories including a specific KNX-lab. The mobile KNX training boxes can be applied to industrial systems incorporated in the labs, a significant added value to link theory and field work. In addition to KNX Training Center, AP College is also KNX-Scientific partner. AP University College cooperates very closely with industry through integration of the latest technologies in its educational programmes and by implementing long-term projects for the industry. The KNX Training Centre for Basic and Advanced Training programmes offers industrial workers the opportunity to obtain a KNX certificate i
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Magallanes 36/38
    28015 Madrid
    Spain

    Phone: +34.915945271
    Mobile: -
    Fax: +34.915943683
    Website: www.apiem.org
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Mazuraniceva 4
    21312 Podstrana
    Croatia

    Phone: +385 21/507600
    Mobile: -
    Fax: +385 21/507606
    Website: www.apricum.com
    Email: -
    Link zur Karte

    Das KNX-Trainingszentrum von Apricum d.o.o. bietet KNX Grundkurse für den gesamten osteuropäischen Raum an. Der Hauptsitz in Split, Kroatien, bietet organisierte Ausbildung mit Praxisnähe in Bezug auf Projektierung, Installation und Inbetriebnahme einer KNX basierten Elektroinstallation. Auf Anfrage von Gruppen oder Organisationen und bei ausreichender Zahl von Anfragen organisiert Apricum auch Kurse in allen Nachbarländern, um der Verbreitung des notwendigen Wissens über KNX Vorschub zu leisten.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Madame Curie 00000
    00000 Beirut
    Lebanon

    Phone: +961.1342442
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Archimedia Lebanon Training Center is a space for the exchange of knowledge and the innovation, oriented to support all the professionals of the industrial and building sectors. Our Training Center is offering on-site and online Basic KNX Training. As main feature, we are the only center worldwide that offers KNX Online Training with remote access to real KNX devices during the learning sessions. For more information, please contact us at team.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Unit 406- Dusseldorf Business Points- Al barsha 1
    PO Box: 283447 Dubai
    United Arab Emirates

    Phone: +971.44328526
    Mobile: -
    Fax: +971.44328525
    Website: www.armiti.ae
    Email: -
    Link zur Karte

    Armiti is one of the best system integrator and training center in the Middle east
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Letnikovskaya 6
    115114 Moscow
    Russian Federation

    Phone: +7.4957884071
    Mobile: -
    Fax: +7.4957873340
    Website: armo-training.ru
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Raad Alley, Yaser Threeway, Niavaran No. 9
    1647718566 Tehran
    Iran, Islamic Republic of

    Phone: +98.2126148258
    Mobile: -
    Fax: +98.2189778348
    Website: www.smart-buildings.ir
    Email: -
    Link zur Karte

    Artman KNX Training Center is the first official KNX Center in Iran. We are offering top quality KNX courses (Basic and Advanced, and Tutor course) to all those like to participate in KNX community. Also Artman is started its efforts to participate in KNX User Club Iran, and organized the 25th anniversary of KNX in Iran. We will continue to introduce KNX solutions to different organizations and individuals in Iran and neighbor countries. All those interested (in Iran and Middle East) can contact us to participate in the courses or other programs related to KNX worldwide standard.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Carrer d'es Teixidors, 32b, Carrer d'es Teixidors, 32b,
    07141 Marratxí
    Spain

    Phone: +34.971770504
    Mobile: -
    Fax: +34.871116242
    Website: http://www.asinem.net/
    Email: -
    Link zur Karte

    Training of KNX partner and training related to the KNX system
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Parque Industrial Autoeuropa 00000
    2951-510 Quinta Do Anjo
    Portugal

    Phone: -
    Mobile: -
    Fax: -
    Website: www.atec.pt
    Email: -
    Link zur Karte

    ATEC – Training Academy, created in December 2003, is the outcome of a project conceived by the promoters Volkswagen Autoeuropa, Siemens, Bosch and the German-Portuguese Chamber of Commerce and Industry, with the support of the Portuguese Government, aiming to provide Portugal with a Training structure that would meet the needs of the Industrial cluster in terms of staff training and qualification. ATEC’s core business is the professional qualification of youngsters in several technical areas. ATEC training methodology according to German standards binds theory and practice allowing trainees to experience the routine of a normal worker. ATEC also offers companies Taylor-made courses and intervention projects in the scope of Operational Consultancy. ATEC currently develops activities from several areas like Mecatronics, Automation, IT, Methods, Quality, Lean Tools, and others.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    West Hekmat St , Andarzgoo Blvd , Farmanieh No 90 ,Unit2
    1938853461 Tehran
    Iran, Islamic Republic of

    Phone: +98.2122208207
    Mobile: -
    Fax: +98.2122694679
    Website: www.Atrinaco.com
    Email: -
    Link zur Karte

    Atrina KNX Training center is a space for the exchange of knowledge and the innovation. With more than 10 years’ experience in building\'s projects and training in building\'s products, we offer a top quality & unique training experience to each applicant in Middle East to all those who like to participate in KNX community (both in Basic, Advanced, and Tutor course in near future). Our training portfolio includes world-wide certificated programs and services for continuous learning. All services are designed for professionals whom want to improve their technical knowledge and, therefore, enhance their leadership and management skills. Atrina Building Automation is an independent player on the market Which has known as first official member of KNX Association in Iran, and also the biggest cooperator of KNX Partner in Middle East. The main Target is to increase the use and knowledge.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    SRTVN Qd 701 cj P sala 3137
    70719900 Brasilia
    Brazil

    Phone: +55.6132027962
    Mobile: -
    Fax: +55.6132027962
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    7th Narenjestan St., Farmanieh Cross Unit 24 28
    1957944451 Tehran
    Iran, Islamic Republic of

    Phone: +98.2126152536
    Mobile: -
    Fax: -
    Website: www.knx.ir
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course
  • B

    Rua da Piedade 39
    9500-362 Ponta Delgada
    Portugal

    Phone: +351.919893822
    Mobile: -
    Fax: -
    Website: http://www.modusnefer.pt
    Email: -
    Link zur Karte

    BAC training is a European (and world wide) engineering, consulting, and training firm. We provide specialized training in the industrial, building and home automation sectors. Our main offices are based in Portugal, with additional international locations. You can reach us via email at :
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    GP/AT N 960
    67056 Ludwigshafen
    Germany

    Phone: +49.6216072286
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Franz-Zang-Straße 3-7
    67059 Ludwigshafen
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Die Berufsbildende Schule Technik 1 ist ein bedeutendes Bildungszentrum der Region Ludwigshafen für die Bereiche Metalltechnik, Elektrotechnik und Informationstechnik. Unsere Schule ist Partner in internationalen Bildungsnetzwerken. Im Rahmen des Unterrichts bieten wir für Schüler unseres Hauses den KNX-Basiskurs an.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Wandsworth Bridge South SW18 1TN
    SW18 1TN London
    United Kingdom

    Phone: +44.2088740404
    Mobile: -
    Fax: +44.2088770153
    Website: www.bemco.co.uk
    Email: -
    Link zur Karte

    The Biritish Electrical Manufacturing Company (BEMCo) is a 3rd generation family business, originally founded in 1893. Today the business has 9 branches around the UK, offering the full range of standard electrical and automation products with a Certified KNX Training centre based at our Wandsworth branch in London.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    O. J. Brochs gate 16
    5006 Bergen
    Norway

    Phone: +47.93034738
    Mobile: -
    Fax: -
    Website: www.bvu.no
    Email: -
    Link zur Karte

    Electrical school where we educate electricians, automation electricians, high voltage electricians, how to install electrical equipment in explosive areas, first aid, low voltage technicians etc. We also run couarses in Ex basic, Ex maintenance. We are also an electrical contractor with 5 electricians involved in installing in houses and industry. We also have couarse in intrinsic safety. All of our instructors have experience fron the north sea and many have been working as a teacher in schools in Bergen. We have also been working for the navy in Bergen.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Klagebach 38
    58579 Schalksmühle
    Germany

    Phone: +49 2355/905405
    Mobile: -
    Fax: +49 2355/905115
    Website: www.berker.com
    Email: -
    Link zur Karte

    .
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Thomas-Mann-Straße 1
    04720 Döbeln
    Germany

    Phone: +49.343157610
    Mobile: -
    Fax: -
    Website: https://www.bsz-dl-mw.de/
    Email: -
    Link zur Karte

    Am Beruflichen Schulzentrum Döbeln – Mittweida werden Elektroniker der Fachrichtung Energie- und Gebäudetechnik ausgebildet. Die Ausbildung umfasst unter anderem die Lerngebiete Beleuchtungstechnik, Klimatechnik, Kommunikationstechnik, Einbruchmeldetechnik, Brandschutztechnik und Heizungssteuerungen. Die KNX-Technologie ist die Brücke, die verbindene Technologie, zwischen den oben genannten Technikbereichen. Fundierte theoretische und praktische Kenntnisse, Fähigkeiten und Fertigkeiten auf dem Gebiet der KNX-Technologie sind unerlässlich. Aus diesem Grund möchte das Berufliche Schulzentrum Döbeln – Mittweida den Auszubildenden in Zukunft zertifizierte KNX-Grundkurse und zertifizierte KNX-Aufbaukurse anbieten. In Zusammenarbeit mit den Fachberatern des Bundeslandes Sachsen und dem Sächsischen Bildungsinstitut werden KNX-Fortbildungskurse auch im Rahmen der Lehrerfortbildung angeboten.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Engerthstraße 117
    1200 Wien
    Austria

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Lavesallee 14
    30169 Hannover
    Germany

    Phone: +49.51126099106
    Mobile: -
    Fax: +49.51113320
    Website: www.bbs-me.de
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Schorbuser Weg 2
    3051 Cottbus
    Germany

    Phone: +49.3555901510
    Mobile: -
    Fax: +49.3557835310
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Weidenstraße 2
    48683 Ahaus
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: www.bbs-ahaus.de
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Toblweg 6
    39031 Bruneck
    Italy

    Phone: -
    Mobile: -
    Fax: -
    Website: www.bruneck.berufsschule.it
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Altes Feld 20
    59821 Arnsberg
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Wüstenhagenerstraße 18-26
    42855 Remscheid
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: www.bzi-rs.de
    Email: -
    Link zur Karte

    Wir führen KNX Basic Kurse in Vollzeit (Tageslehrgänge) und Teilzeit ( Abendlehrgänge) durch. Die theoretische Prüfung wird online abgelegt.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    An der Berufsschule 20
    46236 Bottrop
    Germany

    Phone: +49.2041706270
    Mobile: -
    Fax: +49.20417062777
    Website: www.berufskolleg-bottrop.de
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Herderstraße 3
    45964 Gladbeck
    Germany

    Phone: +49.204329950
    Mobile: -
    Fax: +49.2043299544
    Website: www.berufskolleg-gladbeck.de
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Fischbacherbergstrasse 2
    57072 Siegen
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Glimpfingerstraße 8A
    4020 Linz
    Austria

    Phone: +43.69981404751
    Mobile: -
    Fax: -
    Website: www.bs-linz5.ac.at/home.html
    Email: -
    Link zur Karte

    Die Berufsschule Linz 5 bietet im Rahmen der modularisierten Berufsausbildung im Bereich der Gebäudeautomation die Möglichkeit eine fundierte KNX Grundausbildung zu erhalten. Die Schüler erhalten in einem praxisnahen Unterricht das nötige Wissen vermittelt, um einerseits gegenüber den Kunden für eine KNX Anlage zu argumentieren, andererseites auch die Fähigkeit Anlagen zu projektieren, zu programmieren und auch inbetrieb zu nehmen. Ein wichter teil der Ausbildung ist vorallem die Diagnose und Fehlersuche in einer KNX Anlage. Unsere Schüler erhalten darüber hinaus noch das nötige Wissen eine KNX Anlage mittels Planvorlagen zu dimensionieren, und einen entsprechendne Installationsplan zu zeichnen. Für Personen die nicht Schüler unserer Schule sind, bieten wir entsprechende Abendkurse, bzw. Kruse an Wochenenden an.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Miller von Aichholz Straße 30
    4810 Gmunden
    Austria

    Phone: +43.7612646690
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Die Berufsschule 1 Gmunden bietet im Rahmen des Spezialmoduls Gebäudeleittechnik zusätzlich Berufsausbildung im Bereich KNX an. Folgende Themen werden abgedeckt: Errichten, Programmieren, Parametrieren, Inbetriebnehmen und Prüfen von Gebäudeleitsystemen. Instandhalten und Warten von Gebäudeleitsystemen. Aufsuchen und Beseitigen von Fehlern, Mängeln und Störungen an Gebäudeleitsystemen. Beraten von Kunden in Fragen der Gebäudeleittechnik. Zur Vermittlung der praktischen Inhalte gibt es zwei modern ausgestattete Labors mit je 12 Arbeitsplätzen. Für Personen die nicht Schüler an unserer Schule sind, besteht die Möglichkeit Kurse am Abend zu besuchen.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Donnerschweer Straße 184
    26123 Oldenburg
    Germany

    Phone: +49.441340920
    Mobile: -
    Fax: +49.44134092129
    Website: www.BFE.de
    Email: -
    Link zur Karte

    Für KNX-Seminare aller Art gilt das BFE-Oldenburg bundesweit und international als Ihre erste Adresse. Als Kompetenzzentrum für Gebäudetechnik und Gebäudeautomation strahlt das BFE immer wieder neue Impulse in die Branche. KNX-Seminarteilnehmer am BFE oder vor Ort genießen viele Vorteile: - Kostenloser ETS5-Dongle in KNX Grundkursen! - KNX-Grund-, Aufbau- und Ausbilderkurse (Volle KNX++ Zertifizierung) - Alle Kurse auf deutsch und englisch - Übungen an aktuellen Geräte mehrerer Hersteller, so wie Sie sie in der Praxis vorfinden! - Enge Vernetzung u.a. mit KNX Association, bedeutenden Herstellern, KNX Professionals, SmartHome Initiative D - BFE-Gebäude schon 1992 EIB-Pilotanlage - Lebendiges und stets frisches Know-How von gut vernetzten, kompetenten Trainern - Beste Verpflegung im BFE-Casino und tolles Abendprogramm in der Wohlfühlstadt Oldenburg! Herzlich Willkommen!
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Tempelhofer Straße 15-17
    52068 Aachen
    Germany

    Phone: +49.24196740
    Mobile: -
    Fax: +49.2419674240
    Website: www.hwk-aachen.de
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Vogelsbergstraße 25
    36341 Lauterbach
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: www.bzl-lauterbach.de
    Email: -
    Link zur Karte

    Das Bildungs- und Technologiezentrum für Elektro- und Informationstechnik e.V. in Lauterbach (kurz: BZL Lauterbach) bildet als eine von drei Bundesfachschulen der Deutschen Elektrohandwerke seit über 40 Jahren Elektrofachkräfte aus Handwerk und Industrie erfolgreich aus. Neben den KNX-Grundkursen und den KNX Aufbaukursen stehen KNX Umsteiger Workshops auf ETS 5 und KNX Experten Workshops in unserem Programm. Die KNX Grundkurse sowie die KNX Workshops werden auch als Inhouse-Seminare durchgeführt. Die KNX Grundkurse mit Zertifikatsprüfung sind außerdem Bestandteil der Aufstiegsfortbildung zum Elektrotechniker Meister. Im Rahmen der überbetrieblichen Lehrlingsausbildung gehört die KNX Schulung mit einer Dauer von 1 Woche zum Grundprogramm in der Lehrlingsausbildung. Informationen erhalten Sie über unsere Homepage www.bzl-lauterbach.de oder Sie rufen uns an unter 06641/9117-0.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Köllestrasse 55
    89077 Ulm
    Germany

    Phone: +49.73193717123
    Mobile: -
    Fax: +49.73193717110
    Website: www.hwk-ulm.de
    Email: -
    Link zur Karte

    English
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Raichbergstrasse 87-89
    72072 Tübingen
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Konrad-Adenauer-Ring 3-5
    47167 Duisburg
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Deutsch
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    First floor, Nagadarshan Comples, #228, AMS Layout Vidyaranyapur560097 Bangalore
    India

    Phone: +91.8041738693
    Mobile: -
    Fax: +91.8041738693
    Website: www.bitscraftintegration.com
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    rue NETTER - Résidence Christine 5
    06800 Cagnes-sur-Mer
    France

    Phone: +33.493085914
    Mobile: -
    Fax: -
    Website: www.domogenius.fr/formation-domotique
    Email: -
    Link zur Karte

    DomoGenius is a french HBAS engineering consulting firm, located in the PACA (Provence-Alpes-Côte d’Azur) area. In a constant concern to maintain a real dynamics and synergy between all the HBAS market players (architects, integrators, installers, real estate developers and builders...) of the PACA region, we opened in Nice a KNX+ training center, equipped with the most recent KNX products and mobile units. Our KNX certified tutor will provide you with the knowledges and the know-how relevant to answer all your expectations and to be confident in the successful accomplishment of your future KNX project. Follow us on www.domogenius.fr, "Nos formations" section.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Buntovnik 3
    1421 Sofia
    Bulgaria

    Phone: +359.887600905
    Mobile: -
    Fax: -
    Website: http://www.smartity.com
    Email: -
    Link zur Karte

    BlueKNX Training Center is the first KNX training center in Bulgaria. Our main focus is to deliver in-depth technical knowledge to professionals of different areas, raising their interest in the worldwide stardard for home and building control. BlueKNX is offering as well project management, consultancy and technical support to system integrators and investors with regards to excellence in every detail and step of the process. We aim to be the active ambassador of KNX to the many professional organizations, guilds and chambers with respect to the promotion and implementation of the standard in Bulgaria.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Appadan 2nd St. - Olfat alley No. 3
    81667-7314 Esfahan
    Iran, Islamic Republic of

    Phone: +98.3136623144
    Mobile: -
    Fax: +98.3136628324
    Website: http://BNJ.IR
    Email: -
    Link zur Karte

    Behrad-e-Naghshe Jahan (BNJ) is an Iranian consulting engineering company established in 1990, focusing on the area of Electrical and Automation systems. Over the past two decades, our company has successfully completed hundreds of residential, commercial and industrial projects which includes the first Smart Home project in the city of Isfahan in 2003. With the aim of improving the energy efficiency and promoting the sustainability, by taking advantage of the home automation systems, the company launched several educational initiatives over the past few years such as publishing the Persian translation of the official KNX handbook in two levels of basic and advanced and founding the first training center for the basic and advanced KNX courses in Isfahan. At BNJ, we are committed to use the gift and talent of our expert team to provide the best service possible to our valued customers.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    1203/11 Sk. 3 K:6/606
    35170 Konak/Izmir
    Turkey

    Phone: +90.2324699995
    Mobile: -
    Fax: +90.2324699995
    Website: www.bosmer.com
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Chemin du Grec 440
    06340 Drap
    France

    Phone: +33.688929034
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    BRAO INTEGRATION is proud to announce the opening of its KNX Training Center on the French Riviera. Its first goal is to provide KNX training to electrical installers, electrical distributors, building automation engineers and system integrators. These courses provide training in design, installation and commissioning of a KNX system incorporating both theoretical and practical elements. Moreover, it will also provide more specific courses in Advance Lighting management, HVAC and different supervision systems. BRAO INTEGRATION will also provide "introduction to KNX" in order to meet architects\' and interior designers\' demands for a better understanding of design and control in home and building automatio
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    HaMasger 22
    3812001 Hadera
    Israel

    Phone: +972.507328320
    Mobile: -
    Fax: +972.773328320
    Website: www.bsmart-knx.com
    Email: -
    Link zur Karte

    B.S.Systems is one of the leading companies in Israel,specializing in the KNX standard since 2007. It is involved as a center in the training of students and professionals working in the field of home and building automation. Inside the KNX Training Centre a Smart Home exhibit. B.S.Systems Certified Training Centre will give the participants an experience with real KNX devices and give them ability to design and create new KNX installations.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Limbacher Straße 195
    9116 Chemnitz
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Beckstraße 19
    49809 Lingen
    Germany

    Phone: +49.5919730418
    Mobile: -
    Fax: +49.95197304518
    Website: www.btz-handwerk.de
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Kloster 1
    98530 Rohr
    Germany

    Phone: +49.3684447380
    Mobile: -
    Fax: +49.3684447360
    Website: www.btz-rohr.de
    Email: -
    Link zur Karte

    Das Berufsbildungs- und Technologiezentrum der Handwerkskammer Südthüringen als innovativer Partner des Handwerks und der Industrie.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Tsar Simeon 48
    2850 Petrich
    Bulgaria

    Phone: +359.894504193
    Mobile: -
    Fax: -
    Website: www.batiknx.com
    Email: -
    Link zur Karte

    Building Automation Intelligence ist ein Raum für den Austausch von Wissen und der Innovation. Mit mehr als 10 Jahre Erfahrung in der Schneider Electric für Gebäude Projekte und Ausbildung in Gebäude Produkten bieten wir eine einzigartige trainning Erlebnis für jeden Kunden auf der ganzen Welt. Unsere Mission ist es in der Gebäudesektor Alltag besser für jeden Profi zu machen und hilft Ihnen, die maximale Energieeffizienz und Funktionalität in Gebäuden zu erreichen, durch unsere ausgezeichnete und spezialisierten Dienstleistungen. BAI sucht zu streben danach, unsere bussines mit den Profis, mit der gleichen Leidenschaft, die wir Sie trainieren zu wachsen. Unser Trainingsportfolio umfasst weltweite zertifizierte Programme und Dienstleistungen für kontinuierliches Lernen. Alle unsere Leistungen sind für Profis, die ihre technischen Kenntnisse verbessern möchten
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    11th Street 171
    27012327 Mkalles
    Lebanon

    Phone: +961.1683770
    Mobile: -
    Fax: +961.1683769
    Website: www.batc.com.lb
    Email: -
    Link zur Karte

    Since 2012, BATC is a training center for various specialties in low current technologies. As the first accredited KNX+ Training Center in Lebanon, providing both the KNX Basic & the KNX Advanced Courses & Certification the knowhow of more than 4 decades of practice are shared by the only KNX tutor in Lebanon. BATC provides the advantage of hands on practices for its students with full panels of KNX devices available used during the different training levels. This unique feature in Lebanon allows students to properly troubleshoot installation samples and exercises. In addition, BATC offers Fire Safety & Intrusion Protection Courses under the Supervision of Siemens Building Technologies (Switzerland).
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Corso Nizza 38
    12100 Cuneo
    Italy

    Phone: +39.0171070177
    Mobile: -
    Fax: +39.0171070311
    Website: www.bigsrl.it
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Monaiser Straße 7
    54294 Trier
    Germany

    Phone: +49.6518250160
    Mobile: -
    Fax: +49.6518250150
    Website: www.bues-trier.de
    Email: -
    Link zur Karte

    Unsere Schulungsstätte startete 2013 unter der Trägerschaft der BSB GmbH in Trier. Die Idee dazu entwickelte sich aus dem damaligen Unterrichtszweig Elektrotechnik in der Erwachsenenbildung. Bei der Ausstattung der KNX-Schulungsstätte standen für uns zwei Dinge im Vordergrund: - die Mobilität der praktischen Übungsplätze und - die Kostenverträglichkeit. Unsere selbst entwickelten Schulungs-Modelle sind anschaulich und praxisbezogen. Das Basis-Modell stellt den Grundriss einer Zwei-Raum-Wohnung mit den Gewerken Beleuchtung, Jalousie und Heizung dar. Es lässt es sich mit weiteren Modellen ergänzen. Da wir eine entscheidende Stärke des KNX-Standards hinsichtlich Preis und Verfügbarkeit darin sehen, Produkte verschiedenster internationaler Hersteller zu kombinieren, sind wir auch bei der Materialauswahl für die Modelle herstellerunabhängig geblieben.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Georg-Schuthoff-Platz 1
    40221 Düsseldorf
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Eiffestraße 450
    20537 Hamburg
    Germany

    Phone: +49.402540200
    Mobile: -
    Fax: +49.4025402035
    Website: https://www.bze-hamburg.de/
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course
  • C

    Weiherstrasse 10
    40219 Düsseldorf
    Germany

    Phone: +49.2115580527
    Mobile: -
    Fax: -
    Website: www.cab-ih.com
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Unit 2, Phoenix Park 2
    PE19 8EP St Neots
    United Kingdom

    Phone: +44.1480213744
    Mobile: -
    Fax: +32.7947298282
    Website: http://cedia.co.uk/
    Email: -
    Link zur Karte

    CEDIA’s home technology training gives professionals the opportunity to get expert instruction on the skills, topics, and techniques they will use every day. From boot camps, conferences and events to all-day workshops, CEDIA\'s training is another outlet for you to learn the skills you need from world-class instructors who know the industry. Choose from a mix of hands-on and classroom-based training formats, in topics that include business, operations, technical skills, emerging trends, and more. Many offerings enable attendees to network with and learn from industry peers for an even deeper educational experience.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Rue Saucin 66
    5032 Gembloux
    Belgium

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Rue Henri Koch 22
    4354 Esch-sur-Alzette
    Luxembourg

    Phone: +352.558987206
    Mobile: -
    Fax: +352.559325
    Website: www.cnfpc.lu
    Email: -
    Link zur Karte

    Das nationale Weiterbildungszentrum CNFPC bietet eine Vielfalt an Kursen in den folgenden 4 Kategorien: 1) Weiterbildung für Arbeitnehmer, welche ihre Kenntnisse und Fähigkeiten ausbauen wollen 2) Weiterbildung für Arbeitssuchende, im Partenariat mit der Agentur für Arbeit in Luxemburg ADEM 3) Reintegrationskurse für Schulabbrecher 4) Abendkurse Das CNFPC ist Sitz von "KNX Luxemburg" und dazu einzige anerkannte Ausbildungsstätte für KNX Kurse in Luxemburg.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    ul. Wiekowej Sosny 15
    05540 Zalesie Gorne,Warszawa
    Poland

    Phone: +48.530813317
    Mobile: -
    Fax: -
    Website: www.knxpolska.org
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Grand'rue 185
    6000 CHARLEROI
    Belgium

    Phone: +32.71419440
    Mobile: -
    Fax: -
    Website: www.cerisic.be
    Email: -
    Link zur Karte

    The CERISIC, which is the research centre of the engineering department of the HELHa College in Belgium, is opening its own KNX training centre. The CERISIC will, in the first instance, certify undergraduates who graduated from the HELHa College in home automation, but also people in continuing education: graduates, electricians, system integrators, or anyone interested in such technology. KNX is the worldwide standard for home and building control. The basic course and the advanced course coming soon allow participants to develop skills to use KNX equipment (control of lighting, heating and air conditioning, energy meter, supervision, gateways to other protocols, multimedia, coupling with connected objects, managing security, etc). Together with advances in home automation technology, the CERISIC would like to develop a new research activity for testing or integrating new components
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Rue Sonelgaz 2 villa 419 gué de constantine 419
    16000 Alger
    Algeria

    Phone: +213.21830228
    Mobile: -
    Fax: +213.21830249
    Website: www.cfez-dz.com
    Email: -
    Link zur Karte

    Domotic & smart Building has proven itself in terms of electricity and automation and we offer these services to the professional, for buildings project to small apartments For a better energy efficiency, comfort and safety We take care of our clients for advice, engineering, training, programming, commissioning and after sales service, We have experienced engineers in the sector who are able to fulfill the objectives accurately and on time. We love the challenges, we are passionate about KNX and innovation.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    via XIII Martiri 86
    30027 San Dona di Piave (VE)
    Italy

    Phone: -
    Mobile: -
    Fax: -
    Website: www.donboscosandona.it
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    none none
    P.O. Box 65-379 Taichung
    Taiwan

    Phone: -
    Mobile: -
    Fax: -
    Website: www.knxcenter.com.tw
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Rua S. Rosendo 337
    4300478 Porto
    Portugal

    Phone: +351.915363210
    Mobile: -
    Fax: +351.225362487
    Website: www.cinel.pt
    Email: -
    Link zur Karte

    CINEL – Training centre for the Electronic Industry, Energy, Telecommunications and Information Technologies was established in 1985 from a partnership between IEFP (Portuguese Institute for employment and training) and ANIMEE (Portuguese Electrical and Electronics Industries Association). We have available 22 laboratories equipped with modern technology in areas such as electronics, robotics, automation and control, renewable energies, telecommunications, networks and computers. CINEL is a KNX Training Centre since November 2010 with two locations – Lisbon (headquarters) and Porto (delegation). Our vision: To build bridges between technology and the future. Our Mission: We have been developing all kinds of Training Courses, in the fields of Electronics, Energy, Telecommunications, and ICT allowing our Trainees to better develop their soft skills and hard skills.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Calle 120A 7-65
    01100 Bogota
    Colombia

    Phone: +57.13000816
    Mobile: -
    Fax: +57.13000816
    Website: -
    Email: -
    Link zur Karte

    Contact with existing and potential clients Information of the training center on our website Presentation in magazines, fairs and events specialized in automation Presentation at universities and educational centers
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    viale Giacomo Matteotti 425
    20099 Sesto San Giovanni
    Italy

    Phone: +39.226292206
    Mobile: -
    Fax: +39.02226292335
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Halhi 31 Floor 3
    5120052 Bnei Brak
    Israel

    Phone: +972.546668008
    Mobile: -
    Fax: +972.35090499
    Website: www.control4u.co.il
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    C/ Francisco Brizuela 1
    28011 Madrid
    Spain

    Phone: +34.914635593
    Mobile: -
    Fax: +34.914644276
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Rafael Solana 88 Col. Independencia Del. Benito Juarez03630 Mexico Distrito Federal
    Mexico

    Phone: -
    Mobile: -
    Fax: -
    Website: www.knx.mx
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Les Longues-Raies 11
    2013 Colombier
    Switzerland

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Via Don Minzoni 50
    37138 Verona
    Italy

    Phone: +39.0458070400
    Mobile: -
    Fax: +39.0458070389
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Kallipoleos Avenue 77
    2100 Nicosia
    Cyprus

    Phone: +357.22806000
    Mobile: -
    Fax: +357.22376872
    Website: http://www.mlsi.gov.cy
    Email: -
    Link zur Karte

    Technical Vocational Training. The CPC provides advanced training in two types of education, short-term training and accelerated initial training programs lasting six months. The specializations offered by the CPC include: Plumbing, Applications, engineering services, Telecommunications - Mobile Telephony, Construction, Engineering, Welding, Industrial Automation etc.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course
  • D

    Rue Fontaine St-Pierre 1Fbis
    5330 Assesse
    Belgium

    Phone: +32.83678600
    Mobile: -
    Fax: +32.83678601
    Website: www.dce.be
    Email: -
    Link zur Karte

    DCE hat sich auf den Einzelhandel mit KNX Ausrüstung sowie Ausbildung auf diesem Gebiet spezialisiert. DCE hat sich zu einem Schulungsanbieter entwickelt und bietet auf diesem Gebiet verschiedene Optionen an: • Grundkurse •Fortgeschrittenenkurse • Kurse für Schulungsleiter • Spezialisierte Schulungen zu bestimmten Produkten Die KNX Schulungen bei DCE sind praxisgerecht angelegt. Die Schulungsleiter sind ebenfalls Profis und konzentrieren sich in der Ausbildung auf konkrete Funktionen und Anwendungsgebiete. Sie helfen auch Anwendern, die gerade mit der Installation von KNX Anwendungen beginnen. Monteure finden nicht immer die Zeit für Schulungen. Dem tragen wir Rechnung, indem wir individuelle Termine vereinbaren und auch Einzelschulungen anbieten. Bei Bedarf können auch Schulungstermine beim Kunden vor Ort vereinbart werden. Auf diese Weise bieten wir unseren Kunden eine hohe Flexibilit
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Ellemosevej 25
    8370 Hadsten
    Denmark

    Phone: +45.89370100
    Mobile: -
    Fax: -
    Website: http://www.djhhadsten.dk/
    Email: -
    Link zur Karte

    At Den jydske Haandværkerskole we educate and train tomorrows electricians.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Klosterstraße 20
    74931 Lobbach
    Germany

    Phone: +49.6226971206
    Mobile: -
    Fax: -
    Website: www.desi-tec.de
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Damaschkestr. 9
    41238 Mönchengladbach
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Wir bieten seit mehr als 10 Jahren KNX-Grundkurse mit maximal 8 Teilnehmern an. Alle Teilnehmer bewerteten unsere Kurse mit "gut" bis "sehr gut". Auf Wunsch führen wir Sonder-Kurse auch vor Ort in Ihren Räumen mit unserem mobilen Equipment durch. Unsere Kursteilnehmer profitieren auch durch unsere Projekterfahrung in mehr als 500 Projekten bis ca. 8.000 Busteilnehmer seit 1999. Wir beraten Sie gerne unter +49 2166 670878 oder senden Sie uns eine mail an
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Bahnhofsallee 18
    58507 Lüdenscheid
    Germany

    Phone: +49.235156740
    Mobile: -
    Fax: +49.23515674410
    Website: www.dial.de
    Email: -
    Link zur Karte

    DIAL ist ein Zentrum für Licht und Smart Building. Gemäß dem Leitspruch „Bessere Architektur durch Licht und Automation“ ist das Unternehmen als Wissensvermittler, Planer, Dienstleister und Softwarehaus tätig. Im Bereich KNX vermitteln hauseigene Trainer mit langjähriger Praxiserfahrung Ihr Wissen in Seminaren und Workshops – vom KNX Grundkurs über den Aufbaukurs und Systemexperten bis hin zum Ausbilder. Jedes Seminar wird durch viele praktische Übungen im Praxislabor unterstützt. DIAL entwickelt selbst keine Automationsprodukte und ist absolut herstellerneutral. Der KNX Grundkurs beinhaltet technisches Basiswissen rund um KNX und den Umgang mit dem Softwarewerkzeug ETS. Jeder Teilnehmer erhält in diesem Seminar den ETS USB-Dongle kostenlos, um direkt mit der Planung und Projektierung loslegen zu können. Der Aufbaukurs vermittelt Anwendungswissen für Fortgeschrittene. Hierzu gehören un
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Rheinstraße 31
    76870 Kandel
    Germany

    Phone: -
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Örnek Mah. Dutlubahçe Sokak, ATASEHIR 11A
    34704 Istanbul
    Turkey

    Phone: -
    Mobile: -
    Fax: -
    Website: www.dimel.com.tr
    Email: -
    Link zur Karte

    DIMEL was established in 1988, an engineering company specialized in electrical and electronic fields and their systems installations with a special emphasis in automation systems. DİMEL was successfully certified as KNX Partner in 1998, and intensively focused on introducing KNX (former, EIB INSTABUS) technology to the Turkish market. Since 1998 DIMEL is a leading company in Industrial Power Engineering field and specialized and excelled in Lighting Control Systems. DIMEL was designated as Certified Training Centre in Turkey as part of KONNEX organization in year 2000. Certification courses are offered in English and Turkish aimed at awarding KNX Partner certificate, since then.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    N San Vicente Blvd 113
    BH 90211 Bevely Hills
    United States

    Phone: +1.3106194850
    Mobile: -
    Fax: -
    Website: www.training-knx.com
    Email: -
    Link zur Karte

    Erstes Ausbildungszentrum in den Vereinigten Staaten mit einem zertifizierten KNX ++ Lehrer mit 10 Jahren Erfahrung in diesem Bereich in Europa und den USA. Vertraut mit US-Bauvorschriften und Inspektoren Anfragen. Dieses Zentrum bringt Ihnen Wissen und die weltweite Erfahrung vieler erfolgreicher Projekte sowie vieler Produkte verschiedener Hersteller.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    15 rue de la Tuilerie ZAC de la Madeleine
    77500 Chelles
    France

    Phone: -
    Mobile: -
    Fax: -
    Website: www.formation-domotique.com
    Email: -
    Link zur Karte

    The demand for installers and system integrators to now become certified on the KNX technology has changed. Today, they want to be closed to their current location and avoid any additional transportation and hospitality costs. Domoconsulting used its national network to provide training in different location all over France. The PARIS center has been created and equipped with the latest version of KNX training kits and products to provide the highest quality of training. Please rest assure that you will leave this class with a real deep knowledge of KNX and be extremely comfortable in programming KNX as well.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    rue Alfred Nobel 2 bis
    77420 Champs-sur-Marne
    France

    Phone: +33.0160377894
    Mobile: -
    Fax: -
    Website: www.formation-domotique.com
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Viale Della Vittoria 15/B
    38068 Rovereto
    Italy

    Phone: +39.0464400112
    Mobile: -
    Fax: +39.0464411018
    Website: www.store.domofox.it
    Email: -
    Link zur Karte

    Domofox+++ Knx Training center offers all the categories of knx courses in his own work shop or all over the word. Our staff is ready to assist you with any queries regarding the knx world.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Calle 149 No 45-49, oficina 301
    11001000 Bogota
    Colombia

    Phone: +57.16155172
    Mobile: -
    Fax: +57.12586674
    Website: www.knxtrainingcenter.com.co
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    C. Constitución, Planta 2, Oficina 3 2
    08960 Sant Just Desvern, Barcelona
    Spain

    Phone: +34.932418083
    Mobile: -
    Fax: -
    Website: www.domonetio.com
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Germán Schreiber 276
    LIMA 27 Lima
    Peru

    Phone: +34.932418083
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Domonetio has a wide certifiable experience in automation. It was the first training center to offer the KNX Advanced course in blended mode. Today, Domonetio has consolidated its position as one of the main KNX certified training center in the world, with campus in Barcelona and Bogotá. At Domonetio you will find not only KNX certified training but also a set of courses about home and building automation systems that will help you in your business.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Dikberd 34 Unit 1A
    2200 Herentals
    Belgium

    Phone: +32.14720030
    Mobile: -
    Fax: -
    Website: www.domotechnology.be
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    route de Peylon 4
    33380 Mios
    France

    Phone: +33.699243334
    Mobile: -
    Fax: -
    Website: www.domotic-xperience.com
    Email: -
    Link zur Karte

    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    C. Buyssestraat 15
    1800 Vilvoorde
    Belgium

    Phone: +32.22547967
    Mobile: -
    Fax: -
    Website: bouwopleidingen.vdab.be
    Email: -
    Link zur Karte

    KNX Education
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Av. Nueva Providencia 1881, of 1011
    7500520 Santiago
    Chile

    Phone: +56 2 28857151
    Mobile: -
    Fax: -
    Website: -
    Email: -
    Link zur Karte

    Domus main objective is the training and certification of KNX partners, to acquire the necessary skills for the elaboration and integral development of automation projects of houses and buildings.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course
  • E

    Tralleon 129
    11146 Athens
    Greece

    Phone: +30.6946796003
    Mobile: -
    Fax: -
    Website: www.e-dreams.gr
    Email: -
    Link zur Karte

    working on this
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Brigittenauer Lände 156-158/5/23
    1200 Wien
    Austria

    Phone: +43.12531767
    Mobile: -
    Fax: +43.1253176720
    Website: www.e-necker.at
    Email: -
    Link zur Karte

    E-Necker ist eines von 3 Schulungszentren++ in Österreich und bietet Kurse auch Online und Support für Firmen und Organisationen. Mit seinem Portfolio deckt E-Necker eine große Auswahl an Schulungen für div. Bereiche und Kompetenzstufen ab. Durch die Konzession für Elektrotechnik, findet der Unterricht praxisnahe statt und basiert auf ETS5. Um auf die Bedürfnisse der Kursbesucher individuell eingehen zu können, werden die Kurse in Kleingruppen abgehalten (max. 8 Pers). Nach erfolgreichem Abschluss verfügen die Teilnehmer über umfangreiche KNX-Kenntnisse und erhalten ein europäisches Abschlusszeugnis, sowie Produktzugänge. Das KNX-Partner-Logo darf geführt werden. Zur Zielgruppe zählen die Elektroindustrie, Elektriker/Elektrotechniker, Gebäudeautomationstechniker und Systemintegratoren. Aufgrund des mobilen Schulungszentrums++, werden auch In-House Kurse angeboten.
    Approved for:
    KNX Basic Course
    KNX Advanced Course
    KNX Tutor Course

    Büechliberg 2
    8733 Eschenbach
    Switzerland

    Phone: +41.552603625