Zur Startseite

Webinars

L’Association KNX propose désormais de nombreux webinars pour vous informer sur divers sujets liés à KNX. Ce sont des présentations en ligne en direct à la fois sur des sujets techniques et non-techniques que vous pouvez suivre depuis votre ordinateur et interagir si vous avez des questions.

Informations additionnelles :

  • Tous les webinars sont gratuits
  • Une inscription est nécessaire pour la participation à un webinar
  • Enregistrez-vous dès que vous le pouvez, il ya toujours une date limite d'inscription
  • Après votre inscription, vous recevrez un lien pour rejoindre le webinar
  • Si vous ne disposez pas de casque, vous pouvez également rejoindre le webinar par téléphone
  • Consultez cette page régulièrement, des nouvelles dates sont fréquemment ajoutées

Nous espérons vous rencontrer bientôt sur l’un de nos webinars!

Le timing ne vous convient pas? Plusieurs webinars sont également offerts en version enregistrée ici.

Webinar type

Date

Intended for


Create an HVAC function with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented HVAC function will include:
- heating and cooling
- comfort mode and standby mode
- building protection mode in combination with window contacts (via binary input)
- outside temperature (via weather station)

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 06-08-2019 10:00
To: 06-08-2019 11:00


Intended for:
- Newcomers

Create an HVAC function with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented HVAC function will include:
- heating and cooling
- comfort mode and standby mode
- building protection mode in combination with window contacts (via binary input)
- outside temperature (via weather station)

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 13-08-2019 14:00
To: 13-08-2019 15:00


Intended for:
- Newcomers

Create scenes with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented scenes will include:
- switching and/or dimming control (value) and/or blinds control (position) and/or temperature set point (RTC)
- scene number
- scene 'activation' vs. scene 'learning'

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 20-08-2019 10:00
To: 20-08-2019 11:00


Intended for:
- Newcomers

Create scenes with ETS5 Professional

The webinar is based on KNX Virtual, we therefore recommend to have a look at it prior to the webinar.
- more information can be found here: https://support.knx.org/hc/en-us/sections/360000827779-KNX-Virtual
- especially the videos on this page might be interesting to you: https://support.knx.org/hc/en-us/articles/360002413240-What-is-KNX-Virtual-
- KNX Virtual can be found here: https://my.knx.org/shop/product?product_type_category=software&product_type=knx-virtual

-----------------------------------------------------------------------------------
The presented scenes will include:
- switching and/or dimming control (value) and/or blinds control (position) and/or temperature set point (RTC)
- scene number
- scene 'activation' vs. scene 'learning'

During this webinar the following aspects/features will be explained too:
- KNX devices: programming mode & reset via ETS
- ETS group monitor

Language: English

From: 27-08-2019 14:00
To: 27-08-2019 15:00


Intended for:
- Newcomers

KNX RF Multi development

Webinar delivered by Mr. Philippe Magneron, Connected Buildings standardization manager at Hager Controls SAS. This Webinar addresses the development of KNX RF Multi devices and its communication advantages over single frequency devices.

Language: English

From: 12-09-2019 11:00
To: 12-09-2019 12:00


Intended for:
- Developers
- Members